• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by 135joejohnson

  1. 1

    Bad wiring to my regulator on my 1995 M1083

    After a year, yesterday was the first time I drove my m1083. .I have a temporary connection from the alternator 24v side of the regulator to the breaker panel (ONLY ONE BAD WIRE)but this location is hot all the time. So the question is, where can I find a 24v connection that is only hot when the...
  2. 1

    Bad wiring to my regulator on my 1995 M1083

    On 2/4/16 you ask me if the brake air chamber was physically damaged ? my answers is yes and where can I get one ? I can tap off the switched power under the panel . Is this the panel in the cab we have talk about ?
  3. 1

    Bad wiring to my regulator on my 1995 M1083

    Fix one thing and find a new problem Hi Suprmam I have a 1995 m1083 it is the one that has the bad wire going to the regulator. The cab goes up and down the suspension goes up and down , the spare tire starts up but stops. Two men on the spare tire pushing, the third person hand pumping it...
  4. 1

    Bad wiring to my regulator on my 1995 M1083

    Now I have a new issue , the left wheel on the front rear axle will not turn. I always drain all 3 air tanks , I guess the first step is to release the air chambers. Virginia is in a warm trend and we have had a 60 degree day .I didn't think ice is the problem. What are the next steps I have a...
  5. 1

    Bad wiring to my regulator on my 1995 M1083

    The fan does work. How would I know if the coolant is being circulanted .The heat knob doesn't push in .I ran out of time couldn't tell what the heating cable was attached to. Do You have problems sending more than one message per day. It seems that I cannot send more than one . It tells me to...
  6. 1

    Bad wiring to my regulator on my 1995 M1083

    After looking at the the truck, removing most of the dashboard to replace the gauge bulbs and see why the heater doesn't work etc. I think you were correct with the first suggestion of the box under the spare tire . How can I tell the difference between the truck side vs. the battery side .
  7. 1

    Bad wiring to my regulator on my 1995 M1083

    Part of my problem is the fact that the panel cover is missing .The regulator post labeled "E".Has the bad wire . My question is where does that wire go. I think that the post labeled"AC" goes to the gauge inside the truck cab. How and where would you connect the new fused wires in the cab...
  8. 1

    hammer

    Thanks to Superman
  9. 1

    hammer

    Ihave a 19 95 M1083.IAM having problems with ALTERNATOR ON THE 3116 CAT The alternator repair shop says that there is nothing wrong with the alternator.on the bench the green light alternates right to left correctly. But when I install the alternator there is no lights working on the...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks