Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Help, I have been rebuilding my alternator every couple of days and don't know what is causing them to go out. The truck is currently in the body shop so recommendations will not have feedback until I get the truck back.
Symptoms: Starts and operates with all meter readings at appropriate...
FOUND IT! After posting my symptoms I realized that I didn't have body or head lights and I should have. Went in search of that and found a bad battery cable crimp at the front battery, negative terminal. I guess with the extreme cold we've had here it must have done some expanding and...
I have a 1028 that started up, I moved it, powered it down, and at the end of the day I went to start it. Dash lights illuminated properly, glow plugs functioned properly, turned ignition switch and everything died. No dash lights, no turn signals or 4-way, no relay action, no body lighting. I...
Check your wiring at your turn signal lamps. I've had this problem from wires that are corroded due to broken insulation. Usually the result of gravel roads. I also experience this intermittently when I have a trailer hooked up. Usually the removal of the corrosion by cutting and reconnecting...
I've been through the circuits recently and replaced a bad Gen 1 bulb, after rebuilding a Gen 1, and several fuses, the Glow Plug Relay, and Glow plugs. First symptoms were a flashing Gen 1 light while in operation, Rebuilt the Gen to find same problem, replaced it with a new one and finally...
Hello All, Just got my surplus 998 home and I am trying to locate two each, 112338824 Bumper, Nonmetallic Windshield Bumpers. These are the rubber bumpers that mount at the top of the windshield to protect the glass if the windshield is lowered. Please advise on location to order or if you...
Has anyone ever bobbed a M1008? I just purchased a parts vehicle that has a good frame and drivetrain and was thinking about shortening it to the length of a M1009. Ever been done? Obstacles to prevent this?
Your response is appreciated.
Thanks!
My M1028 bed is rusted out and I am considering removal and then mounting my HMMWV Shelter mount to the frame of the M1028. Does anyone have any ideas or suggestions for this project?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!