• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by ALB39055

  1. A

    MEP-802A. Won’t stay running.

    Been working on a 802 I recently acquired. It is doing the same thing, cranks then solenoid cuts it off. The connector was cut off of the set side for connecting to the solenoid. Tested power and spliced it together. Couldn't figure other 2 out, both had continuity. Tried it, cranked then...
  2. A

    Introduction (MEP-802A’s)

    The diode i was thinking about was the one on the ac interrupter switch.
  3. A

    Introduction (MEP-802A’s)

    Ok, just checking. Will get them in each set before first crank attempt.
  4. A

    Introduction (MEP-802A’s)

    Thank you very much, I will be reading all the manuals. The two sets have the fuse upgrade but not the mov. I have the diodes ordered. I read something in here about ensuring the correct direction (pathway) for the diode. Is it right to left or vice versa? This may be in the documents I have...
  5. A

    Introduction (MEP-802A’s)

    Here they are. Green one has the cleanest gauge panel Ive seen.
  6. A

    Introduction (MEP-802A’s)

    Hello, I am a new member desert storm vet. Just purchased my first pair or 802a's. One 10hrs new one with 1100. First impression cut connector on the machine wiring side of the fuel solenoid. Any folks in MS, LA area into these interested in workshops please reach out. The work begins...
See more
112,767members
166,297threads
2,342,141posts
824online users
Top