-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
AllAmerican505's latest activity
-
AllAmerican505 replied to the thread Gen1 trouble.I had new ac Delhi light bulb holders I had to bend the tabs up for better connection. The tested good on continuity but for some reason... -
AllAmerican505 replied to the thread Gen1 trouble.Super stupid I’ve had this problem for awhile. So I rebuilt the cluster and cilium and cleaned all the grounds replaced all the bulbs...
-
AllAmerican505 replied to the thread Gen1 trouble.update today I found the problem. I now have 29.5 volts across the battery’s 12.5 at brown wire unplugged gen1 Next how to figure out...
-
AllAmerican505 replied to the thread Gen1 trouble.Yes from Rareelectrical New Type Isolated Ground Cucv 12 Volt 100 Amp Alternator Compatible With Part Number 10459234
-
AllAmerican505 replied to the thread Gen1 trouble.It’s a brand new alternator as well
-
AllAmerican505 replied to the thread Gen1 trouble.Has power all the lights work key doesn’t go to start so may have screwed the pooch on the column rebuild. Either way same problem no...
-
AllAmerican505 replied to the thread Gen1 trouble.update still no power at brown wire and no charge. I donno unless someone can help me figure it out the 24volt system is going the dodo...
-
AllAmerican505 replied to the thread Gen1 trouble.I will try more tomorrow
-
The light comes on with the key, and the regulator, brown wire, is the ground. Once you start it, the ground is gone because the...
-
AllAmerican505 replied to the thread Gen1 trouble.Ghost in the machine I need to figure this out as I want the 24v and slave cable option. The longer this takes the less likely I will...
-
AllAmerican505 replied to the thread Gen1 trouble.I agree 100% I’m chasing my tail and a new alternator and still 26.4 ish volts. Does the light even come on with key on ever? It’s all...
-
AllAmerican505 replied to the thread Gen1 trouble.Not build but bulb…
-
AllAmerican505 replied to the thread Gen1 trouble.I just tested from the alt plug brown to build and has continuity.
-
AllAmerican505 replied to the thread Gen1 trouble.Yes I have continuity just checked brown wire to dash bulb both side’s Does the light even come on ever
-
AllAmerican505 replied to the thread Gen1 trouble.No I did not somewhere from the cluster to the fire wall is my problem. That’s what I think Seems I can set up a long wire test for that
