Recent content by AllAmerican505

I had new ac Delhi light bulb holders I had to bend the tabs up for better connection. The tested good on continuity but for some reason once I bent them up and put back in got power on pin 8

Super stupid I’ve had this problem for awhile. So I rebuilt the cluster and cilium and cleaned all the grounds replaced all the bulbs and any sockets that were broken. Replaced the gen1 with 3 different used alts and finally replaced with new. Replaced the PCB and all the sockets with acdelco...

update today I found the problem. I now have 29.5 volts across the battery’s 12.5 at brown wire unplugged gen1 Next how to figure out how to make the gauge work Side note still no gen1 light on start up but does charge

Yes from Rareelectrical New Type Isolated Ground Cucv 12 Volt 100 Amp Alternator Compatible With Part Number 10459234

It’s a brand new alternator as well

Has power all the lights work key doesn’t go to start so may have screwed the pooch on the column rebuild. Either way same problem no 12volt brown wire problem gen1 not exciting. No power on engine bay block brown wire But have 12 volt on the inside dash all fuses are ok and have all been...

update still no power at brown wire and no charge. I donno unless someone can help me figure it out the 24volt system is going the dodo bird. Complete horse pucky. No one sells good harness’s has to be cucv specific. Now I don’t even start from ignition anymore so must have screwed the pooch on...

I will try more tomorrow

Ghost in the machine I need to figure this out as I want the 24v and slave cable option. The longer this takes the less likely I will leave it 24volt

I agree 100% I’m chasing my tail and a new alternator and still 26.4 ish volts. Does the light even come on with key on ever? It’s all powered but nothing in the brown wire key on or off.

Not build but bulb…

I just tested from the alt plug brown to build and has continuity.

Yes I have continuity just checked brown wire to dash bulb both side’s Does the light even come on ever

No I did not somewhere from the cluster to the fire wall is my problem. That’s what I think Seems I can set up a long wire test for that

I did and the heater works as well as oil and 4x4 lights