• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Barrman's latest activity

  • Barrman
    Barrman replied to the thread AN PTFE.
    I love AN fittings. Easy and infinitely reusable. Route the one from the primary filter under the radiator to the secondary filters...
  • Barrman
    Barrman replied to the thread AN PTFE.
    I typed the above and then saw your location. Do you have the metal pipe rusting out? That would be a good idea switching over to PTFE...
  • Barrman
    Barrman replied to the thread AN PTFE.
    The numbers for the Army/Navy fittings are in 16ths. So, a -6 would be 6/16 or 3/8. Where are you wanting to replace the steel tubing...
  • Barrman
    Fuel pump or blocked needle and seat in the carb? My stock engine would just turn off while driving due to crud in the tank blocking...
  • Barrman
    Barrman replied to the thread Upper Radiator hose for M1008.
    I some how actually ordered 2 21284 hoses. They showed up today and both are 1.75” ID on both ends. I think you got a mislabeled part.
    • IMG_5302.jpeg
    • IMG_5303.jpeg
  • Barrman
    Barrman replied to the thread Upper Radiator hose for M1008.
    I’ve never seen the M1031 throttle control unit before. Thanks for posting a wide shot.
  • Barrman
    Barrman replied to the thread Upper Radiator hose for M1008.
    The -34P Technical manual for the CUCV is nothing but exploded views of the entire truck. Here is a link to access the manuals...
  • Barrman
    Barrman replied to the thread 2025 TX MV Rally.
    Glad you made it home and nice to meet you.
  • Barrman
    Barrman replied to the thread M1009 Electrical resistors..
    Start with downloading the -20 Technical Manual. It will tell you to start with load checking the batteries and making sure they are...
  • Barrman
    Barrman replied to the thread 2025 TX MV Rally.
    I just charged the A/C in the M1009 a few minutes ago Clint. I was prepping a ”luxury” convoy for you. See you tomorrow and sorry to...
  • Barrman
    I forgot about the robbery. Sorry to bring it up again. No worries on the stencil stuff. We will have plenty of time to visit about it...
  • Barrman
    Barrman replied to the thread 2025 TX MV Rally.
    I loaded my IBEK tow bar in the M1009 a little while ago. No fuel leakage today either. I was looking forward to seeing those of you...
  • Barrman
    Carnac, Didn’t you have stencils or a stencil machine to make stencils one year? I am going to be needing big and small letter and...
  • Barrman
    Barrman replied to the thread M1008 Hard Start.
    You are going to see this a lot. Do not use starting fluid on a glow plug engine! Unless you totally have the system disabled and are...
  • Barrman
    Barrman replied to the thread 2025 TX MV Rally.
    I am going to change my vehicle line up yet again. I drove the M715 to town yesterday evening and it left a good sized puddle of coolant...
Top