-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Barrman's latest activity
-
Barrman replied to the thread Need Help Identifying a Part.Good catch. I have never disassembled that part of a truck. -
Barrman replied to the thread New Top Install Problems - Rusty Nuts?!?.Buy a thread chaser kit. Here is a video about what they are and how they are different from a tap. A lubricant of your choice and...
-
Barrman replied to the thread Need Help Identifying a Part.I can’t say for sure but that tickles “Tie down” in my head. Valve cover to fuel line or wiring harness? I write that because the fuel...
-
Barrman replied to the thread Help with lift pump install..If you turn the engine with one hand while pushing on the rod with the other. You will feel the low spot easily. Use grease as you...
-
Barrman replied to the thread The car show was canceled.That F-105 in Wild Weasel colors just makes me stop what I am doing and sit in awe for a few minutes of what those guys did. There is...
-
Barrman replied to the thread Operation: "More Cowbell"; my M1114 thread.Looks good. You ready for a bunch of rain the next few days?
-
Barrman replied to the thread M998 Oil Pump Problem.Does your truck have a cable driven tachometer? That cable is driven by the same gear that drives the oil pump is Why I ask if you have...
-
Barrman replied to the thread 6.5l GEP engine rebuild kits.OK. You know what you are doing. That makes a big difference in the answer. The last GEP I had apart I used these guys for bearings...
-
Barrman replied to the thread M1028: Turbo 6.2 or 6.5 swap?.Thank you for watching my videos. Glad they helped. Adding a turbo to either engine will get you real close to what the F-250 could...
-
Barrman replied to the thread M1028: Turbo 6.2 or 6.5 swap?.I didn’t mean to give that impression. A turbo on a 6.2 is an amazing thing. However, even with a turbo you will not keep up with any...
-
Barrman replied to the thread 6.5l GEP engine rebuild kits.Are all of those things bad on your engine? If so, getting a used pull out might be cheaper and surer. Normally if bearings and pistons...
-
Barrman replied to the thread M1028: Turbo 6.2 or 6.5 swap?.What are your end goals for the truck? I ask because the 6.2 has the small throat combustion chambers. While the 6.5 has bigger...
-
Barrman replied to the thread 6.2 timing issue.Take it for a drive. 40-45 mph is the speed where the squarebody becomes a barn door in the wind. Try to get at least that fast and just...
-
Barrman replied to the thread 6.2 timing issue.How many hours do you figure the truck has idled and just moved slowly since the last time it went down the highway at speed for at...