Recent content by BeetTrucker

I will check them out, thanks!

On a different note, I wasn’t getting a prime at the primer assembly and I believe it was your YouTube video Ronmar that helped me resolve that issue by clearing debris from the flap inside the assembly. I was able to get a prime in 18 pumps. But now it is running extremely rough and valves...

Yes, i verified by connecting both pins on truck side and the oil pressure dummy light came on. I found and ordered one. Hoping to finally put this issue to rest. Will keep you all posted.

The one I’m pointing to in the first picture? The second picture is the plug coming off of it. Is there a replacement that you know of that is plug and play? I replaced the silver oil pressure sending unit above it with no luck.

This is the one that I got.

Is this what you are referring to?

The lighting issue was a pinched wire on the cord going back to the trailer. Still dealing with this no k11 light/no oil pressure dummy light/no start Issue. Thinking about replacing the oil pressure sensor to see if that will fix my problem. Wondering which one is it in these pictures. The...

Cleaned a few grounds but not all and have not resolved starting issue yet, but I can still go and I’m running it currently. New problem arose where CB67 and CB78 are now tripping and I’m losing my trailer brake lights and my cab running lights. I have headlights and all my interior lights...

I have not cleaned up any of the grounds besides the one side of the strap connected to the starter. I will try cleaning the ends up on the grounds and seeing if that helps. But like said earlier, it seems like the longer it runs (hotter it gets) the longer it takes to get started. For example...

It is intermittent, sometimes k26 will light up and sometimes it won’t same with k11. I just started it and K26 stayed on for close to a minute and k11 shut off quickly after start. When k11 and k26 aren’t turning on at key switch then the “engine oil pressure” light isn’t on which is a good...

Forgot to add, 2001 truck. As I said originally, if it sits it will fire right up, it is currently doing that. I can get it to start after it sits for a couple of minutes. I’ve now noticed that the alt/excite (k11) light is not lit up when it won’t start and it when it does light up, it will...

I replaced the starter and cleaner wire ends with no luck. No clicks when push start button. LD2, LD3 and LD17 are lit up when switch is on start position.

I put a new starter in, cleaned all wires and same thing. Have not done voltage drop as I haven’t had a second hand. When I flip the start switch to on I hear the clicks coming from the wheel well/solenoid/starter area but not from PDP panel. When I push the start button there are no clicks from...

Have a new starter ready to be thrown in, just odd that it will fire perfect first start of the day or when cooled down but not at all when the truck is warmed up.

Hey guys, my m1088a1 will fire right up first start of the day but after it gets ran hard, cooled down and then shut down, if you try starting it right away it will not have anything at the start button. All dash lights will be on properly but there is nothing at all at the start button. Then...