Recent content by beltfed1934

  1. B

    Does the LTAS Cab FMTVs, or MRAPS for that matter, have True Runflats?

    Does the LTAS or LSAC cab (armored) trucks run a different tire than the standard M1078? a runflat like on a hmmwv? Are runflat's avail for the LMTV?
  2. B

    Need Help w/ Air Brake System

    Yeah, thanks, you are the greatest! Oh, BTW, before I pull the valve, where do I get a replacement? is that something that I can order at NAPA? TIA, Austin
  3. B

    Need Help w/ Air Brake System

    Hello, LMTV M1078: When I apply the brakes, I have air releasing through this bleed? valve cap. Hoping not to re-invent the wheel, does this mean this entire valve is failing? or ????? what would be the recommended fix? TIA, Austin
  4. B

    Need Help w/ Starting Problem: LMTV M1078

    I hard-wired some jumper wires to the big contacts on the relay on the driver passenger rail near the starter, got it warmed up where it wont start conventionally, then I jumped those 2 wires and she fired right up. So, what does that tell me? TIA, Austin
  5. B

    94' LMTV Wiring Diagram Help needed

    Thanks! Spent 15 min in TM trying to figure it out but didnt see it for some reason.
  6. B

    94' LMTV Wiring Diagram Help needed

    Can someone tell me what the P39 wire/connection is for? Mine is unplugged-not sure if it's supposed to be that way or not, and I cant find it in the dang tm's to save my life! TIA, Austin
  7. B

    Need Help w/ Starting Problem: LMTV M1078

    Dang, back to the drawing board, finally had a chance to go get pizza tonight in the LMTV after bypassing the starter thermal switch. Luckily, I was smart enough to leave it running, as when I got home and parked it and shut it down, walla-wont restart. Doesnt even try or turn over. Relay in...
  8. B

    Need Help w/ Starting Problem: LMTV M1078

    Hate to sound like a rookie, but just cked it out, there is a plug composing 2 small white wires that plugs into the rear of the starter (into the plastic cap on the rear of the starter), im assuming that is what you are referring? if so, just cut the plug off and join the two wires with a twist...
  9. B

    Need Help w/ Starting Problem: LMTV M1078

    Thanks, will try that and report!
  10. B

    Need Help w/ Starting Problem: LMTV M1078

    All, New to vehicle-just got it about 1-mo ago, runs pretty good but just today started developing this annoying issue: It starts no problem 1st push of button, but when I drive it for a few miles and get it warmed up, and stop somewhere and kill the engine, when I go to restart nothing...
  11. B

    Need Help w/Cargo Cover M923A2

    All, I'm sure it's a simple task but wont have much time to figure it out, I will need to roll up the sides of my cargo cover for a parade on Saturday, so my family and friends can sit in the back during the parade and still have some shade, is there any trick to this? or is it pretty straight...
  12. B

    Did they ever make an Armored Cab upgrade package for M939 series cabs? (I.E. M923A2)

    Guess I should have googled that first, duh......
  13. B

    Did they ever make an Armored Cab upgrade package for M939 series cabs? (I.E. M923A2)

    This may have been covered already, but is there an up-armored package made for the 5-ton cab? I've seen some 5-ton trainers made to look like MRAPs but i've never seen a military-issued cab protection kit. I know there is a company making survivalist armored trucks, but did the military ever...
  14. B

    WTK: What RPM is my Truck Tranny Supposed to Shift Gears??? M923A2

    All, My truck is a 2010 Texarkana rebuild, it runs great, but the transmission doesnt shift until the rpms are nearly at 2000, is this correct? Most gears, it shifts at between 1900 and 2000 rpm. Also, I nearly have the pedal to the floor to get the 2000rpm, is this correct, I nearly have to...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks