Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Well I've tried low gear with mode on ... no 4x4 ..I don't know exactly what to do ... can someone explain to me how these transfercases are constructed inside ... how do they transfer 30 percent forward and 70 percent to the rear ..and mode on becomes 50/50 is there clutch packs in there or is...
Well I looked in the small filter on the scavenge line and wasn't just a lot there but some small flakes and a few small shaving from some where cleaned it all up and, still no 4x4 ... if there is debris on the shift module can it make it do this ? Haven't had time to pull it off yet...
Ok .. gonna have to do some more research and check that screen ... thanks guys , by the way this is an awesome forum .. every one has been super helpful. . Thanks
Well put a ground from the housing to the cab and checked the connections on the Trans and transfercase also put a little bit of electric grease in em ... now, I have roughly 2.7 volts coming out the d pin and 2.6 out the c pin .. this is the little round plug on the transfercase ... anyone no...