-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CaptainBillUSMC's latest activity
-
C. True. With a clean drain pan, the oil can fall out and be picked back up and fed to the machine...
-
CWith the diffs, I'd check the drain hole instead of the fill hole. There might be good clean lube on top of water.
-
CMy opinion? I'd check it all, to include diffs, before driving it home. But if the fluids looked OK, I'd drive it the 200miles or so on...
-
C. Ahhh... Okay. So what I would do is definitely open every "fill hole" and stick your finger in there. The oil should look clean and...
-
CIf the shifter is not placing the valve body control into the full detent position, this could cause anomalies. This “slipping” upon...
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.Sorry, I should've clarified, I was saying above that I was going to change out all the fluids when (and if) I bring it home. And you...
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.Thanks! So, you don't think I should be concerned at all about the loud clunk in reverse? And the whiny sound? Yeah, I will be...
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.Ok thanks! You are probably correct. Back in the "rear" getting and having Dex3 is simple. But, when deployed, it becomes an issue...
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.Really? Wow! So Shell Rotella for example in the transmission? Is that not a concern in the winter? This is good insight! Thanks!
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.I spoke with the seller today. There is a bit more to the story that I wasn’t aware of. The truck has been sitting for 5-6 years. When...
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.Thank you! Thanks! I’m going there on Friday after this snow moves through to see the truck and help troubleshoot. Tough to...
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.The play in the shifter cable he was referring to was where the cable meets the linkage at the transmission. He didn't have to work the...
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.I spoke with the owner. It was not in low range. It was definitely in high.
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.Unfortunately, I don't have anymore info. He told me via text. I didn't ask those questions. I was more concerned with whether he...
-
CCaptainBillUSMC replied to the thread M925A2 reverse issue.Thanks! Yes, that's where I stand right now. If it is something simple, I am ready to go! But, not if its going to turn into a money...
