Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I live in NW AR. Apparently the 5132/Kat canisters are not stocked anywhere around here.
The people on SS who said they had some no longer do.
Any ideas?
FYI 1 3/16 will work but its sloppy. Its actually 30 mm.
Remove the grill
I have the OEM winch. Tilt the cab. You have a lot more access. My bolts were not stuck. Used a cheater box end wrench on the open end of the box end of the 1 3/16 wrench. put boxend on the bolt. My bolt...
Its used complete center. They were $2500 ea. Don't know if the price has changed. Plus you need to change/ adjust your speedometer.
I would have to dig out my paperwork to be sure. I bought my truck from MME. They did all the work for $1000 plus parts.
my rig will go 65 all day long. Did it...
Well he may have it wrong. But I said it exactly as he said it. But he is a recently retired 1st Sargent.
He was b!iching cuz Forestry charges labor to install lights & siren. Actually they do not. It's right there on their page. Materials only.
I have spent the last 6 months trying to...
Thanks Ron. Your chart confirms the standard FMTV 5 ton=10,000lbs
Awsomemness, Interesting. Any idea where this discussion is? or where to find the axle limit? I get the point, however there is more to the equation than just the axles. Tires, frame flex, springs, etc. But it...
I need to settle a disagreement.
Is there any load limit configuration that exceeds:
5000 lbs for LMTV
10,000 lbs for FMTV
??
How much does the bed weigh?
Thanks
Saw this thread searching for info on changing the biscuits.
To sell the OEM winch" complete" as a "kit" you also need to remove the hydraulic reservoir under the air cleaner and ALL the hoses and ALL wiring harness related to the winch, relays and hardware and the hand throttle. Don't...
ok I'll bite
those are the bolts in side mounted battery cables.
Looks like a phenolic center. 2pos. 2neg Wires into a inline disconnect.
Its a way to power accessories while the batteries are out? Or a trickle charger hook up.
So how did I do?🤪