Recent content by CES 3245th

Thank you so much I appreciate the info,I was looking under the dash today and I didn't see any ground wire for that fuel gauge.I take it it doesn't need one or have one?

I want to replace my fuel gauge,which is not a big deal but I want to do it without pulling out my hair! What is the best and easiest way to tackle this? Any helpful information would be grateful and thank you in advance! (y) 1983 M923A1 5 Ton NHC-250 Diesel

Good info thank you 👍

👍🤣

1983 AM General M923A1 Fuel gauge needle is jumping back and forth. Is it that the fuel gauge is no good or is there something else that could be causing the Needle to go to the left and to the right rapidly? Any advice or help would be greatly appreciated thank you in advance

1983 AM General M923A1 Fuel gauge needle is jumping back and forth. Is it that the fuel gauge is no good or is there something else that could be causing the Needle to go to the left and to the right rapidly? Any advice or help would be greatly appreciated thank you in advance

TY simp5782 for that video. not having a 500# torque wrench can you use the torque multiplier to reinstall the nuts ,if sohow do you know when you reach the torque specification which I believe is 500#

Any good recommendations On Tools like this "Wurth Nut Buddy" What are the best ones available? As a side note,not having a 500# torque wrench how would you know what the torque is using this particular tool? 🤔 Thanks in advance

I know the TM calls for 70# tire pressure on all (6) 14.00R20 Michelin XZL on a M923A1 5 Ton. The primary driving of this vehicle will be done on asphalt. I have been asking around in the MV community about tire pressure and getting different numbers from different people. So with all that said...

I have M923A1 5 Ton ,I put in a bunch LED lights and I had problems with them working properly as well. I bought this item the LED Lights and it took my issues away. Not sure if you would have the same luck but it's food for thought! Turn Signal Flasher Control Unit 11613631 - 24v (LED...

13:42 #4 M813rc ....Great information, and I appreciate you taking the time on this request.

Based on RAPCO paint color charts on their website are these the correct (3) color camo patterns for a 1983 U.S.M.C. M923A1 5-Ton truck? Any help from the Bullpen would be greatly appreciated, and thank you in advance!

I realize this is a VERY OLD post of yours but I thought I would take a shot anyways! I am looking for the two sections of the whip antenna for a MX 6707/ VRC. Thank you

Thank you my friend, good and useful info as usual!

Rich, Here are some distributors In your area for Donaldson Products. • MUSTANG CAT 1281 BUTLER RD LEAGUE CITY, TX, US 77573-4873 Phone Number: 1-409-935-7000 Fax Number: 1-409-935-7475 www.mustangcat.com 23.01 Miles • MNI DIESEL INC CORP 7001 EASTHAVEN BLVD HOUSTON, TX, US 77017-6553...