Recent content by cjcottrill

While that is true, I was referring to the USGI issue cans with the large center mounted cam lock lids. There is, of course, an exception for the small offset cam locks issued by the USMC. The off shore small cam lock cans are prolific here also. Sent from my iPhone using Tapatalk

I have one of each on mine. The screw top lids are for fuel, the other is for water. Look on the bottom of the screw type for the date stamp, the correct year cans are readily available. For the cam lock lids look on the top under the handle for the date and a W for water. Sent from my iPhone...

If you can download a copy of TM 9-8030, page 24-27 has a really good explanation of lighting & switch operation. It includes black & white photos of the black out lights as mounted on the truck. You should be able to get a good idea of where the lights would have been originally located on your...

Your instruments appear to not be original and may have illumination built in. The indicator lights appear to have been changed as well. I’ll see if I can get a picture of an original panel for you. Sent from my iPhone using Tapatalk

I think You should have one high beam indicator and two panel lights. You rotate the little window toward the instrument you need to illuminate. They are not much but do produce a little illumination. Sent from my iPhone using Tapatalk

It also shows the other side as well, same price. Type in part number UP 9376 and UP 9375. Sent from my iPhone using Tapatalk

This shows as current from my local NAPA online store. Sent from my iPhone using Tapatalk

The date on the box is 2018, I didn’t realize it had been 5 years. Time seems to get away from me these days. I apologize for leading you down a wagon path. Sent from my iPhone using Tapatalk

I did not see the NAPA part number listed on line. I went to the local store with the numbers and the counter clerk looked it up. He had them in the store for me to pick up by 0730 the next day. Sent from my iPhone using Tapatalk

Be sure to note that the left and right side are different. The piston sizes are different at either end. I have attached pictures of both boxes so you can see the individual part numbers. Sent from my iPhone using Tapatalk

Wheel cylinders from my local NAPA store. They were in stock in the warehouse and delivered the next morning. Perfect fit and function. I don’t remember the cost but I remember it was cheaper than any online place and there was no shipping charge. I also got a 10% AAA discount. Sent from my...

http://www.odcloth.com/hardware/hardwareinfo.html Sent from my iPhone using Tapatalk

I’m sure you will get some good advice but, if the core has been missing for a while I would recommend you take it to a service shop and have a vacuum pulled on the system before it is charged. Moisture will accumulate in the system if has been open to the atmosphere. That little bit of moisture...

I don’t know if the webbing shrinks at all but I took mine off the truck and stretched it out on a flat surface, it measured 96” as opposed to 96-3/4”. It is pretty old and has been wet and sun baked many times. I suppose if it is cotton it would be reasonable to imagine that it could have...

The -20P manual item number 12 on the diagram is part number 14072469. Sent from my iPhone using Tapatalk