• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by Cobra03

  1. Cobra03

    M17A3 Decon apparatus ideas?

    Does anyone else have any uses for the M17A3?
  2. Cobra03

    M923a2 clanking grinding noise from under cab? Transfer case or U joint?

    pull the front driveshaft off, and then drive it. I just had the same thing happen to mine. It takes ten minutes to get the driveshaft off. My front drive flange in the Tcase has play and the bearing is bad. I will be dropping the case and replacing the case and rebuilding mine for a spare...
  3. Cobra03

    6CTA8.3 rebuild or surplus

    Tinstar, how much were they going for?
  4. Cobra03

    M923A2 transfer case front output question.

    The NHC250 is the only one with the front carrier bearing. Monkeyboyarmy, I was afraid of that. I guess I will just find a new transfer case and replace. Then fix mine in the floor and have a spare. I have seen a bunch in Oklahoma on GL. Does anybody know what the going auction price is?
  5. Cobra03

    M923A2 transfer case front output question.

    I will check this weekend with it running if the out put flange is free or not. It does not have a carrier bearing on the front driveshaft. But I am going to buy one. I have heard from multiple people that with a good carrier bearing they drive nice. From what I have heard.
  6. Cobra03

    M923A2 transfer case front output question.

    I got my 923 in December, and when I drive it, it is so loud. I thought it was nature of the beast. I would have to wear earplugs. This thing shook, shimmied, banged down the road. I checked all ujoints, ok. I noticed that the output flange on the front driveshaft was leaking really bad. I...
  7. Cobra03

    Anyone want to have a MV gathering in Missouri?

    I would be in for a St. Louis meet up and swap.
  8. Cobra03

    M939 pto questions

    I know this a old post, but did anyone find out where to get the seal and ujoint? the Seal Number is Angus Gaco IN 51311. Im not coming up with anything on the Googles.
  9. Cobra03

    Picked up a 923!

    Napa wiper blade part number is 60-1250 $5 each. I just bought mine and had a hard time locating them. All the info you need are in these pages. Now go turn up the injector pump!
  10. Cobra03

    M925 a1 armored crew cab

    I'm interested to see how he grill shapes up on the 5 ton. I would like to armor mine, but it has to flow right.
  11. Cobra03

    M925 a1 armored crew cab

    That looks good so far! What particular Mrap grill is that?
  12. Cobra03

    Replace M939 Front Axle Seals and Boots DIY

    Starting at post #35.
  13. Cobra03

    Stemco Seals

    On that A2, what size are those nuts? I know they are in the 4 inch range. I need to get the socket before I tackle this job.
  14. Cobra03

    M939 cab armor kit

    haha^ jeez.
  15. Cobra03

    RG 33 MRAP bumper

    Curious as to where I could find one of these and how much? The radiator protection also.
See more
112,703members
166,261threads
2,341,739posts
968online users
Top