• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Dexis's latest activity

  • D
    Two issues I see there, first I dont have a load tester. Second is I'm not sure what I would do about the battery cables as they sit vs...
    • IMG_0528.jpeg
    • IMG_0527.jpeg
  • D
    What would I have to do to switch to a pair of group 31’s? Any modifications and what about battery cable routing. Also is that...
  • D
    So I went and disconnected the exciter wire and started the truck up. Seemed fine at first except voltage was showing around 22V. Made...
  • D
    Well as tempting as a new FREE WELDER sounds I guess I’ll just swap the new voltage regulator over and report back. Do I need to...
  • D
    I think ill try and swap my regulator for the one on the refurb alt I picked up. I also found this video about the “exciter wire...
  • D
    Well holy smokes, that didn't work out. Here’s the update step by step. Put it back together and started heading off the property to...
  • D
    Ok, interesting development. I was 2 bolts away from having the alternator out…had the long alt mounting bolt left holding it in place...
  • D
    Nothing loose on the polarity protection device/LBCD or anywhere else along the line that I can find. Guess im headed to the alternator...
  • D
    Awesome, thanks. No battery disconnect on mine but ill go drop the spare right now and go back down the line from alt to batteries...
  • D
    Everything was tight at the alternator/volt regulator and all 4 batteries when I checked, unless there is/are additional component(s) in...
  • D
    When I checked the alternator last week i was getting 13.8-13.9 and 27.8-28.0. I did just get a reman alternator with regulator. Time to...
  • D
    Hey all, I've got a new to me 2001 m1078a1 that started throwing the D1323 code, voltage from ECU high, on the Trans. So im trying to...
Top