Recent content by ekdee1

Replaced my king pin bushings...eriksmilitarysurplus has the correct bushing. Be aware that you will need a hand reamer to custom fit each bushing, and a good press and bushing insertion tools to get them in and out.

I see 2 different repair kits on SaturnSurplus. Which one is correct for the M35A2? What is difference between the kits? From the SS website: M35 Master Cyl. Repair Kit 5702178 2530-00-620-3556 $26.50 S2-6 M35 Master Cyl. Repair Kit 7539309...

Alright, I bled my brakes in the Deuce this morning. All was well until I went for a drive. The pedal went almost to the floor, but stiffens up as I pump it. Anyone experience this? Anyone have any ideas what could be causing this? Brakes are all adjusted per spec, the truck sat for a...

I went to Batteries Plus and bought a couple of 12V HD's that matched the 6TL's AH And CCA's. They work fine. The advantage of the 6TL's and other military batteries is they are designed to sit idle for long periods of time. Now, if I can just find a new battery box!

I had the same problem a couple of months ago. Both Interstate batteries tested dead. Put in a fresh set of heavy duty batteries and it runs like a champ! Living in Arizona batteries last about 3 years max.

Received my new wheel bearings today. Upon further inspection I noticed one of the tapered roller bearings was made in China. The part number, fit and function are correct. Anyone had good or bad luck or experience with Chinese manufactured bearings?

I'm overhauling the steering knuckles on my Deuce and when I attempted to remove the nuts from the steering arm studs, I pulled studs with the nuts. How to I reinstall the 4 studs in the steering knuckle?? Thanks!

My transfer case occasionally works itself out of high gear while in use. If I just pull up on the handle it goes back into gear. Anyone have experience with their transfer case falling out of high and what was the fix? Thanks. Eric in Tucson, AZ