Recent content by flainn

  1. flainn

    MEP-802A strange behavior

    I worked my way carefully through all of guyfang's steps, and none of the components mentioned tested as bad. Everything seems to be normal, except I can't get the start switch to do anything (no preheat click, no fuel pump noises, no crank). Dead crank works fine. I'm wondering at this point...
  2. flainn

    MEP-802A strange behavior

    Thank you both for the suggestions -- I will work my way through this over the next few days and let you know what I find.
  3. flainn

    MEP-802A strange behavior

    Hi, I've looked through the TM's troubleshooting procedures but can't find anything that addresses the random behavior I'm seeing with my MEP-802A. Since I got it, sometimes it acts completely normal. The control panel has power, it starts right up and runs just fine. I have load tested it...
  4. flainn

    Need water pump mounting plate gasket for MEP-802A

    Appears the price has gone up, but $140 for a complete genuine Cummins gasket set doesn't seem like that bad of a deal. I'm going to pick one up. Thanks for the help.
  5. flainn

    Need water pump mounting plate gasket for MEP-802A

    Hi, I'm looking for a source for the gasket that goes between the water pump mounting plate and the block. Also, if I can get them, I'd like to replace the sleeve and preformed packings that go between the block and the water pump. Anybody know where I can get these?
  6. flainn

    Effect of no FU1 fuse?

    Ok, you know what? I'll go it on my own. Enjoy yourselves.
  7. flainn

    MEP-802A MEP-803A Filters and Parts

    Excuse me for trying to help.
  8. flainn

    Effect of no FU1 fuse?

    I already told you I have the quad winding fuse mod. So you're claiming that if the stator is blown, the engine won't even crank from SW1? That makes no sense from the wiring diagram. Nor does it square with the fact that the engine cranks just fine from the dead crank switch. I'm trying to...
  9. flainn

    MEP-802A MEP-803A Filters and Parts

    This thread is about MEP-802A parts. These hoses are MEP-802A parts. You'd prefer I started an entirely new thread for this?
  10. flainn

    MEP-802A MEP-803A Filters and Parts

    Confirmed that Team Equip is legit; I got my hoses in the mail today.
  11. flainn

    MEP Drawing restoration

    This is wonderful and very helpful. Thank you for your work on this.
  12. flainn

    Effect of no FU1 fuse?

    I'm not completely clueless when it comes to engines and electrical. I'm a ham radio operator, and I've owned a dozen diesel vehicles, all of which I've maintained. Also, I'm an IT guy. So please go ahead and stop assuming that I'm clueless, would you? Thanks. I don't need to read through a...
  13. flainn

    Effect of no FU1 fuse?

    No. I'm at work today, 30 miles away. As I said above, when the weather doesn't suck (it does today), I will work through the troubleshooting procedure.
  14. flainn

    Effect of no FU1 fuse?

    Yes, I know. I'm well aware of how one of those switches works.
  15. flainn

    Effect of no FU1 fuse?

    I believe S17 is the emergency stop switch. I did check that. If it's pulled out, I get the fuel and temperature gauges zeroing themselves when I turn the master switch to "prime & run", but nothing else happens. If S17 is pushed in (as expected), I get nothing. It seems I've got 24v to two...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks