• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by Goodpedro

  1. G

    Push button light switch

    Did so...can t find the thing on their site
  2. G

    Push button light switch

    can you offer the Narton link? Will it fit my 1996 M1084?
  3. G

    LMTV rocker switches

    Hey friend, where on earth is the yellow part spredsheet????
  4. G

    LMTV rocker switches

    hey guys, thanks for your inputs. Ok my in dash (m1084 A0) Hazard switch is busted. I took it out and the part number is 511 197. Checked Rome truck parts and found the switch.....But....now i wionder if the switch i took out is ...the proper switch cause Rome have "special switch only for...
  5. G

    LMTV rocker switches

    Hey guys, the "Hazard " switch on my m1084 is bustes and i need another one for mechanical inspection. Any idées? Same vendors as above?
  6. G

    Another LMTV Alternator Gremlin Identified - Battery BT2(-) Connection

    the TL 99 at the proper place did solve my major problem aka 24v al around. Batteries are now charging a1. Flashers still not working , and hazards too (but in this case the switch is srewed up.
  7. G

    Another LMTV Alternator Gremlin Identified - Battery BT2(-) Connection

    guess that also explains that turning signals don t work since its on 12v and my system does not pump 12v as it is
  8. G

    Another LMTV Alternator Gremlin Identified - Battery BT2(-) Connection

    So only BT1 and BT2 batteries loose their voltage when i turn on the lights. Make sense since the 12v part is never sollicitated since the circuit is not hooked to anything. Bt3 and BT4 stay full charge
  9. G

    Another LMTV Alternator Gremlin Identified - Battery BT2(-) Connection

    ok guys, i also have 4 wires coming in the battery compartment from cab. i also have no 12 volt cause i too have what looks like a missing wire to complete the 12 v circuit. So two short wires have tags (tl 39 and tl 10). Both are attached to Bt1 positive (24V) so far so good. Now the 2...
  10. G

    M1088 with 4 (Four) leads into the battery box

    With the picture above of the 4 wires coming un the battery compartiment....can Someone specify which is the 12 v (i know super short is 24v, and clarify the training 2 please
  11. G

    Another LMTV Alternator Gremlin Identified - Battery BT2(-) Connection

    all good but what number /tag on the 12v? got same problem, got 4 wires coming into battery compartment. So out of the four what is the 12v.
  12. G

    need electric schematic for M1084 A0

    alternator problem. Shit
  13. G

    need electric schematic for M1084 A0

    Suprman, do you mean the PTO switch on the dash?
  14. G

    need electric schematic for M1084 A0

    pierre_trudeau2004@yahoo.ca turning lights don t work...all breakers are ok but there is an electrical problem. Also something is draining my batteries real fast. Alternator lights are flashing so that is not the problem
Top