Recent content by guns1977

  1. G

    M35A3 Power Assist Steering Problems

    You will have to drill out the other side (currently undrilled) to be able to drive the pins out to allow rebuild. Once disassembled inspect and make sure no unusual gouges or nothing is broken. At this point either the Orings will be broke, or using a oring pick remove the orings and you will...
  2. G

    M35A3 Power Assist Steering Problems

    I would turn the air off completely to the air assist. Drive it and see if it still pulls, it may just be a tire, brake, tierod etc issue. If it doesnt pull you may have to rebuild the draglink, a oring may be cracked allowing air pressure to bleed by
  3. G

    Airbags for M840

    Would it be possible to use actual springs in place of the airbags? I have access to and measured the ST180 Bush Whacker tail wheel springs and brackets. It is an easy conversion to this BUT with the constant spring pressure on hookup and unhooking the shelter will this cause an issue? ie...
  4. G

    Airbags for M840

    Thanks
  5. G

    Airbags for M840

    Yes 840
  6. G

    Airbags for M840

    Im not familiar with airbags anyone know a source?
  7. G

    Trailer/truck space need MD to AL

    8x10 1,500 lbs space need to haul from southern Md to northeast Al?
  8. G

    AL Types of Tags for M35A3

    Thanks, my only option I found is getting a "farm" tag. They wont allow a vintage tag on a 1999 model truck, it has to be 30-35 years old.
  9. G

    AL Types of Tags for M35A3

    What are the types of tags that can be used for the M35A3? It's part of my collection, I dont have a farm, I'm not commercial. I was talking to a member years ago that purchased a one time tag for his collection but I cant remember what type he said. It wasn't a vintage vehicle tag, but thats...
  10. G

    M35A3 check valve alternative question

    I was thinking about just using a ball valve and that way I know when its open and when its closed.
  11. G

    Can't drain fuel/water separator - Cat 3116

    For my understanding the return filter or strainer you mention is on the return line on top of the pump returning back to the tank? I want to go thru all the screens/strainers in the system when I change out the fuel filter and chk and clean the water seperator if needed. Thanks
  12. G

    M35A3 check valve alternative question

    Ive been reading up the the common check valve sticking issue. Is there any real danger to completely take it out? I know of it being done with no affect on any fuel drain back. Truck cranks easily anytime. Or is there another option to prevent the stick check valve issue? Elec fuel pump to...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks