-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
hooligan327's latest activity
-
hooligan327 replied to the thread MEP803a Rough Idle.I did replace the L5 shortly after purchasing the generator. The extra bolt in there is being used as a stopper of sorts. When I... -
hooligan327 replied to the thread MEP803a Rough Idle.There wasn't a load on the generator at the beginning of the video. At that point the batteries were full and the inverter stopped...
-
hooligan327 replied to the thread MEP803a Rough Idle.I ended up having to charge my batteries this morning. It took a bit more than usual to start the generator (it was 31 degrees out), but...
-
hooligan327 replied to the thread MEP803a Rough Idle.I guess that I should add. On a cold start, it starts and idles well. Also, when it was cold and I was using the engine heater on it, it...
-
hooligan327 replied to the thread MEP803a Rough Idle.I just wanted to follow up on this. I finally got around to replacing the fuel filters and the air filter a few weeks ago. The water...
-
Well being a brushless head, there should be no mechanical reasons on that side (unless there is something failing... but you would know...
-
hooligan327 replied to the thread MEP803a Rough Idle.I'll take a look. Most of the time when it idles like that, it does it after it's been running for a couple hours, the batteries are...
-
hooligan327 replied to the thread MEP803a Rough Idle.Changing out the fuel /water separator is on the list for today. It's currently -10 out there so I'm hoping it warms up a bit. I haven't...
-
First, I wanted to say thanks to all those who selflessly contribute their knowledge here. I'm pretty new to owning/operating one of...
