• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by huntler

  1. H

    Radio mount for HMMWV GMV

    I see someone made a repro of one of the pieces I’m missing. The bare aluminum piece shown in this pic.
  2. H

    Radio mount for HMMWV GMV

    i don’t have any tm’s specific to the GMV. My Google goo must be terrible and trying to search just GMV on SS is not easy. Luckily I found this thread. I have that buss bar new also. I bought a partial kit with the cables, the infini-D, bus bars and the lower gray and kick bar. It was missing a...
  3. H

    Radio mount for HMMWV GMV

    This is amazing detail! I have the tan infi-d inverter, but had no idea where the buss bar went or how any of it was laid out. This info is a huge help!
  4. H

    Tight/hard steering in one spot....

    good info. I have similar issue with a 1151 and was thinking it may be the steering gear. I'll use your experience and check the shaft joints.
  5. H

    Radio mount for HMMWV GMV

    I'm needing the top rack extension for the GMV. It was mentioned here people reproduce it. Does anyone know if there are any still available? I've just started work on my GMV radio rack and its the biggest piece i'm missing.. Regards
  6. H

    M939 8.3 cta compressor failures, need function info

    I followed the diagnosis in the field maintenance manual which literally says if this condition exists notify your supervisor. Great info. Im betting on the unloader being stuck. I'll post what I find. This is also a 2012 rebuild truck. Thanks
  7. H

    M939 8.3 cta compressor failures, need function info

    Thanks for the replys guys. So if it pumps all of the time then I would think when it fails it would or could contaminate the brake lines with oil. I say this because it's oiled by the engine oil. I don't seem to have any contamination and engine oil isn't low. I should mention I drove it with...
  8. H

    M939 8.3 cta compressor failures, need function info

    On a recent trip I suddenly lost air pressure. Checked for leaks and found none. Following the tm I checked the line coming off of the top of the compressor and it does not have any air coming out. The tm says to contact a supervisor. Lol My questions are, if the compressor is bad wouldn't I...
  9. H

    BMY Colorado Title?

    Please let us know who to contact at the state level. I just got a CO title for a BMY M923 and under "model" on the title it is blank even though they were provided with all of the correct information. It also states mileage as zero even though the correct mileage was given. All info was on the...
  10. H

    RRAD Hooks, TX. load out and storage assistance

    HI, I am looking for load out assistance and possible storage. If storage not available I can store across from the RRAD at RR surplus but they cant do the recovery. It's a M936 a2 wrecker. Runs but has a blown front tire and a blown rear tire. If storing at RR surplus the rear should be ok to...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks