Recent content by jcollings

  1. jcollings

    Saving deeply discharged Optima 51R's

    I had some luck bringing some 4 V hawkers backup. The key thing is is not letting the charger go over 15 V as glass mat batteries do not like that. Usually an AGM charger will meet that criteria. But then again it's always a shot some have come back some have not. Also make sure they do not...
  2. jcollings

    MEP-802a fuel/water separator replacement: stuck

    Large channel locks with the right direction is the best way. IMO Sent from my SM-G975U using Tapatalk
  3. jcollings

    MEP-802a fuel/water separator replacement: stuck

    Maybe Santa will bring you a present and get it off.[emoji1787] they are are a bear to get off. Make sure you grab them as high as you can.right to the joint where it spins off. Good luck. Sent from my SM-G975U using Tapatalk
  4. jcollings

    Turkey day outage

    [emoji631][emoji106] Sent from my SM-G975U using Tapatalk
  5. jcollings

    Casters on an 831a

    My try this place. Casters & Wheels | Caster City https://castercity.com/m//default.htm I don't think any hard caster will go in dirt unless its pneumatic and 8" tall more like 10. Here's a couple pictures of what I did works good on concrete if I go dirtI roll and on 3/4" hard plywood...
  6. jcollings

    MEP-804-B Voltage

    Watch "3 phase generator for single phase residential backup power" on YouTube https://youtu.be/d1quMdHegn0 Sent from my SM-G975U using Tapatalk
  7. jcollings

    MEP 007a

    Yeah that the problem I've been hearing, o-rings regular or o-ring square flat ? JC Sent from my SM-G975U using Tapatalk
  8. jcollings

    New MEP 803 Owner (So far very happy)

    Use good oil for break in... Sent from my SM-G975U using Tapatalk
  9. jcollings

    Mep803a conversion to single phase

    Also don't switch the selecting switch while running............ Sent from my SM-G975U using Tapatalk
  10. jcollings

    Mep803a conversion to single phase

    Its factory wired for 120/240. Single phase or 120/208 3 phase Switch in control panel let's you select it. Sent from my SM-G975U using Tapatalk
  11. jcollings

    MEP 007a

    Guy, I would be interested in those NSN filter numbers also. Thank you John C Sent from my SM-G975U using Tapatalk
  12. jcollings

    MEP 007a

    Guy is who gave me all that filter numbers posted earlier Sent from my SM-G975U using Tapatalk
  13. jcollings

    MEP 007a

    I'm kind of overseeing the technicians working on this thing , As a bystander from a different department. which is kind of a joke. they put some filters in and left some filters out. they didn't listen to me in terms of disconnecting the supply hose that feeds the injector block to bleed out...
  14. jcollings

    MEP 007a

    This unit was at a work place. Delivered no fuel, oils. Drained etc. After oiling up, fueling, new batteries priming systems, tried to fire up. Not luck not even a burp or hint off starting. Techs cranked and cranked and more almost running all battery charge out. Fuel to injector pump and to...
  15. jcollings

    MEP-007a oil filters

    Any luck on those filters you ordered for fitment? Or have they not shown up yet. Thank you Sent from my SM-G975U using Tapatalk
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks