• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

jimbo913's latest activity

  • J
    jimbo913 replied to the thread MEP-80X Blow by.
    I did touch the upper radiator hose today after 2hrs at load and it was hot but I could touch it without getting burned so after reading...
  • J
    jimbo913 replied to the thread MEP-80X Blow by.
    Good Good eye. Yes, it runs on the cold side according to the gauge and my assumption is that it is a faulty gauge. What else could it...
  • J
    jimbo913 replied to the thread MEP-80X Blow by.
    Then my genset is a bit weak. At 75% with resistance load its at 59Hz from a no load of 61.5Hz
  • J
    jimbo913 reacted to DieselAddict's post in the thread MEP-80X Blow by with Like Like.
    Your no load RPM should be set around 61.5hz. That should give you near 60hz at full load.
  • J
    jimbo913 replied to the thread MEP-80X Blow by.
    Where does everyone run their no load Hz on the 802A.
  • J
    jimbo913 replied to the thread MEP-80X Blow by.
    It’s touching 60F today and I had some wrenching to do outside so I figured it was a great day to resume operation break-in. Right away...
    • 89F6B2B9-A9A3-4520-AE93-6FA58AFFF6A0.png
Show older items
108,496members
163,753threads
2,303,895posts
716online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks