Recent content by jwbronco

The 2 left ones are inline attenuators with N-type connectors on both ends. They are used to simulate antenna loss or reduce power getting to a circuit. The N-type connector is a 50 ohm style connector even though it doesn't have an impedance. The one on the right is a termination resistor...

You actually don't need on of them, if you have clean dc power you can connect it straight to your ky-57 using a ba-5590 adapter which simulates the battery side. The HYP is strictly an adapter to adapt a cannon plug to a battery style adapter. It does have some caps in it though. It attaches...

Also if you got the VRC-83 it would cost more because it has a 30 watt amplifier. You can seperate the radio from the outside case by unscrewing like 4 or 8 screws on the outside of the case near the handles. Once you pull it out you could hard mount the case or just create a mount for that...

Those TM or TO's are for the TRC-176 but you have to realize that the radio in there is a RT-1319 and depending on modification a A or B. The mods are for ECCM. As far as the radio it is a 24 VDC radio and it puts out 2w in low power and 10w in high power but that is Peak envelope power. The...

I'm very familiar with the radio, what would you like to know about it?