Recent content by Jwf

ok so I was able to pin out j Z and a from the wiring diagram I had to order some test leads before I try to test it but I have them identified at least. however when the tcm is plugged in everything on that harness gets ignition power 4 get 24 and 2 get 12v with the tcm unplugged 3 of them...

ok that seems east enough now what exactly am i missing on the transmission side of things? is it just the breaker and power from the battery or are there relays and stuff missing as well?

can anyone by chance get some pictures of the harness under the seat and where it goes so I can get an idea of what I'm looking at?

everything is cut off so all of the tags are gone

unfortunately everything is gone so I'm not even sure what to start testing or anything I need some pictures of one that is not cut up

thank you, I can't see any markings on the cut wires I need to figure out which harness it is I don't want to fry something messing with the wrong circuit

here are some more pictures

I definitely believe there is a cut wire and or missing parts there is nothing on my truck in the passenger side seat area I just don't know where to look for the wires to put power to or which wires they would be I will post some more pictures in a minute.

there is a computer under the rear driver side seat it has 1 harness going to it and a capped off port

there is a computer under the rear driver side seat it has 1 harness going to it and a capped off port

hello everyone, I've been a lurker for a while but this is my first post. I was hoping someone could help me figure out this new to me m1165a1 that I picked up yesterday. it runs good after i cleaned the cat but when I went to drive it today it won't shift, I also noticed the trans light does...