Recent content by kennys@wi.rr.com

  1. kennys@wi.rr.com

    M916-M920 Tech & Tips

    My original post was on 1/6/2011. Exactly 8 years later I was on my way to pickup an M920 in NC. Dreams do come true.
  2. kennys@wi.rr.com

    Removing, rebuilding, reinstalling Hydraulic Head

    I have most, if not all, of the parts in stock and ready to go. I just have to list the bow tie clip again. https://mvpartstore.com/t/fuel-system
  3. kennys@wi.rr.com

    Removing, rebuilding, reinstalling Hydraulic Head

    I just got a new shipment of clips and I may have a button here somewhere. Let me know if you need anything.
  4. kennys@wi.rr.com

    1985 M923A1 Dual Fuel Line Mod and new Fuel Button Install

    I can't speak to a Big Cam but according to Pittsburgh Power adding the second fuel line to a truck that doesn't have one adds 25 horse. I think on a truck that already has it you would need to change the button to notice a difference.
  5. kennys@wi.rr.com

    1985 M923A1 Dual Fuel Line Mod and new Fuel Button Install

    I've had great success with the kit. So much so that I'm actually selling them on my website and most of the people who've used them are reporting back with great success as well. It's not the easiest to install and I do recommend a pyro be installed as well when using this though. More...
  6. kennys@wi.rr.com

    Removing, rebuilding, reinstalling Hydraulic Head

    Just trying to help. If you need to remove it make sure to replace the o-rings right away. I have plenty on the shelf if you need a set. Also if you need any advice or guidance while doing the job don't hesitate to reach out to me.
  7. kennys@wi.rr.com

    Removing, rebuilding, reinstalling Hydraulic Head

    For anyone interested I attempted to make a video to show the process as well. My phone is no video camera so I'm sorry for the grainy video. If I can get my hands on an actual video camera I'll gladly redo the video. Until that happens though, this is what I have. I know some people just...
  8. kennys@wi.rr.com

    New Wisconsin show/rally Aug 12th, Central Wisconsin Military Show

    Yes, they trailer it in from MI. A great group of guys, and lady, for sure.
  9. kennys@wi.rr.com

    Removing, rebuilding, reinstalling Hydraulic Head

    That one is really tore up.
  10. kennys@wi.rr.com

    New Wisconsin show/rally Aug 12th, Central Wisconsin Military Show

    For all who made it, you already know it was a good time, for those who didn't; you missed an amazing show. I have never ran such a busy booth at any show I have ever done. People from outside the hobby were there buying. At one time I had seven people working my booth. No I didn't travel...
  11. kennys@wi.rr.com

    Removing, rebuilding, reinstalling Hydraulic Head

    If you need any help just let me know. I've been on the phone with several people the last week reviewing the process with them. I'm also going to release a tutorial video series in the coming weeks.
  12. kennys@wi.rr.com

    Duel fuel line mod M818 855 cummins

    It worked so well I started making kits and selling them. It's a pain to install but for me personally it was well worth it. However, the one thing I would not go without is an EGT gauge. More fuel=more heat. You have to keep an eye on that.
  13. kennys@wi.rr.com

    Removing, rebuilding, reinstalling Hydraulic Head

    Pretty much. If you tighten them either the truck wont run or you'll have a run away.
  14. kennys@wi.rr.com

    Removing, rebuilding, reinstalling Hydraulic Head

    You have to tighten those two screws a little at a time. Find the sweet spot and then use the safety wire to lock them in place.
  15. kennys@wi.rr.com

    Diesel getting in oil. What else should I look at while I'm fixing this?

    Well I have plenty of o-rings left if you need them.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks