-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
KKroger's latest activity
-
KAlso to add, it isn't uncommon for the filter/dryer to be installed backwards/reverse flow by the military. Everything still works, but...
-
KKKroger replied to the thread NEW AC installation.the orientation of the Evap is not that important, as long as the fan can draw air to blow across it. and Make SURE the condensate can...
-
KKKroger replied to the thread NEW AC installation.A Couple Thermal Camera shots the first one shows the high side pipinand Dryer at the Evaporator, the second shows the wayback portion...
-
-
KKKroger replied to the thread NEW AC installation.Internally there is really nothing special. there is an evap coil and a blower assembly and a TXV, most assuredly COTS parts nothing...
-
KKKroger replied to the thread NEW AC installation.Well aware of where the blower is, and I am well aware as stated earlier that the plastic housing for the blower is broken and caused an...
-
KKKroger replied to the thread NEW AC installation.Replacement blower has shipped ETA Friday Midday. Rolled with windows up and AC on yesterday on the way home and it was quite nice...
-
KKKroger replied to the thread NEW AC installation.Adding to this this morning on the way to work at 0 Dark Thirty the outside temp was 62... so... this afternoon 1630 it was upper 80s...
-
KKKroger replied to the thread What have you done to your HMMWV today/lately.there are a pair of them up there
-
KKKroger replied to the thread NEW AC installation.Made poorly from 3"*.125 alu angle
-
KKKroger replied to the thread NEW AC installation.So... Figured out the wiring... it was a bit of a mess.. but not horrible after getting on it for real. was having some issues with the...
-
-
KKKroger replied to the thread NEW AC installation.Yeah the old boss would say either "Its just a damned beer joint" or "We aint' buildin a church! Send it!"
-
KKKroger replied to the thread NEW AC installation.Have to say a Sunex 8mm impact hex driver on a butterfly Air Impact was handy to get through the fan to remove the clutch bolts and the...
-
KKKroger replied to the thread NEW AC installation.slight misalignment on compressor the thing sits at an angle not much but noticeable. Slight Misalignment Line Crimper Line Crimping
-
KKKroger replied to the thread NEW AC installation.Pulled Vacuum on the system held 30" forever. Unfortunately my can tap was incompatible... new one arriving tomorrow at some point. the...
