• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

kloppk's latest activity

  • K
    kloppk replied to the thread MEP 1030A.
    Have you tested the Exciter Stator resistance to be sure it's good? TM says it should be about 12 ohms. Have you measured the DC...
  • K
    kloppk replied to the thread MEP 1030A.
    Have you performed the troubleshooting steps in the -24 TM for that fault? Results?
  • K
    kloppk replied to the thread MEP 1030A.
    There is no need to externally "flash" the gen head. THE DCS takes care of doing that automatically. Excerpt from the -10 operators...
    • 1758651369725.png
    • 1758651585635.png
  • K
    kloppk reacted to DieselAddict's post in the thread Auxilary fuel pump force on with Like Like.
    If it saves you any time, order a molex extension cable and mod it. Super easy to find on amazon.
  • K
    kloppk reacted to dutchofsc's post in the thread Auxilary fuel pump force on with Like Like.
    Order placed, I get enough to make 2 and have spare pins, and still under 10 bucks with shipping. I'll keep you posted Can't wait for...
  • K
    kloppk replied to the thread Auxilary fuel pump force on.
    Housing and pins one end Molex Housing P/N 3092042 DigiKey Housing Molex pins P/N 2092103 DigiKey Male Pins Housing and Pins other...
    • 1758465693840.png
    • 1758465745024.png
    • 1758465795320.png
    • 1758465840108.png
  • K
    kloppk replied to the thread Auxilary fuel pump force on.
    The connection between the A9 and the float switch is done with a 4 pin Molex connector. To do the mod without cutting any wire could be...
    • 1758456748624.png
  • K
    kloppk replied to the thread Auxilary fuel pump force on.
    I'd suggest connecting your toggle switch across the FL2 float switch and not do it by providing power directly to the Aux Pump...
  • K
    kloppk reacted to gdoubbya's post in the thread MEP-804 Repair with Like Like.
    Thanks. It’s an 804A and I did eventually find the schematic in the TMs. Thanks again.
  • K
    kloppk reacted to Guyfang's post in the thread MEP-804 Repair with Like Like.
    Why don't you look in the TM forum here in SS? Is it an MEP-804A or a MEP-804B?
  • K
    kloppk reacted to grywitt's post in the thread Mep 831A load issues with Like Like.
    I found a thread on here about getting that pmg off and the tool to use. Stop looking i found it. I will be digging into this engine...
  • K
    kloppk reacted to Light in the Dark's post in the thread Faded E-Stop Button Fix with Like Like.
    I've never found the button alone, always as an assembled switch.
  • K
    kloppk reacted to Guyfang's post in the thread MEP-804B Starting issues with Like Like.
    The MPU has caused more problems in the MEP-8** family of generators then any other part. And more MPU's have been destroyed due to not...
  • K
    kloppk reacted to Ray70's post in the thread 802A parts gen with Sad Sad.
    Great! I've been sitting on a couple super nice 803's on a power plant trailer W/belly tank with <20 hours each.... because I've been...
  • K
    kloppk reacted to Retired-Tired's post in the thread MEP-804B Starting issues with Like Like.
    My MEP-804B had a similar situation last week. It started and ran for several times with the over-speed trip activating when it wanted...
Show older items
114,383members
167,269threads
2,354,732posts
3,641online users
Top