Recent content by LeftCoast32

West Kentucky Doors These are very nice and fit well

Thanks!

Thanks. The rollover vent that goes into the cover plate with gasket is still used. I was referring to the threaded boss in the tank next to the cover plate. It is listed for the M1165 Rev B while mine is an ECV. 12480679 / 01-593-2117 / 4820-01-593-2117 - VALVE, FUEL TANK ROLLOVER...

Arizona was no problem.

I had a crack in my fuel tank so I purchased a new one and cleaned everything up for the swap. We cleaned everything, replaced all seals/gaskets, new pick-up screen and new level sender. We also deleted 2 unused fuel lines, mine had 4 lines in the cover plate. This M1165 has the fording kit...

Stock (even spaced) 24 bolt wheels with TR Beadlocks and IROK radial 39.5x13.5x16.5. Absolutely love the combo!

Stock (even spaced) 24 bolt wheels with TR Beadlocks and IROK radial 39.5x13.5x16.5. Absolutely love the combo!

Replaced the Mechanical Lift Pump this week. My lift pump was leaking from the seam. Not a bad job, just a little time consuming due to the location.

They are Interco IROK Radials, 39.5x13.5x16.5 and they measure 39.5" off and 39" on. They are taller then most if not all of the 40" on the market. I really like the stock 24 bolt wheels so it was an easy decision. Used the TW beadlock PCVs and Centramatic balancing rings so no weights were...

Mine sets pretty tall on stock suspension and actually rides really nice. Keep in mind that all the armor is removed, I have not had the opportunity to weigh it yet. This is it on a set of 39.5" tall tires.

Here is the tag from my 2007 M1165 which is a late ECV with Shepherd Steering. As you can see the total of 15,500 is there also. I have seen all kinds of tags and weights that are different depending on how they were ordered. You can see that the MFR Cage code is the same for the 1151 and...

Swap the front wheels/tires with the back and see if the wobble/shake migrates.

With the help of a friend we hung the West Kentucky X-Doors yesterday. Long day in the heat but they turned out really nice. Next up will be to drive around on them for a few and then take them back off to paint them.

With the help of a friend we hung the West Kentucky X-Doors yesterday. Long day in the heat but they turned out really nice. Next up will be to drive around on them for a few and then take them back off to paint them.

No lift, it is a stock height M1165A1B3FK5 without armor. It set really tall without the armor on it from auction. I have seen others with a 2" lift that were not as tall. It also rides really smooth like it has softride lift springs in it already. I am really impressed with the ride quality...