Recent content by Little Gus

That is just a link for wheel spacers and adapters. There is no adapter that goes from an 8x6.5 to a 5x5” bolt pattern. The spacing going from 8 lug won’t allow to go to 5 lug. So did you actually find a 5x5 hub replacement for the 8x6.5?

I have a M116A3 trailer and I do not want to do a full axel swap. I want to keep the original drop axel. What I would like to do is just swap the 8x6.5 hub to a 5x5 hub. Has anyone done this? Does anyone have a part number or info on where I could get this replacement hub?

I am curious were you able to find a 5 x 5 hub replacement for the M116 trailer?

Are you still making these boxes for a vic1 system? And is there a way to either add to the box or is it capable of being able to plug in like say a gaming head set with mic with either like a 3.5mm headphone jack or a 1/4” and be able to talk and head using a new style civilian head set?

I got one. Not sure how to put pics up on this site. But I can email or text you one

Hydraulic head I got one. Send me your number or email or what ever your comfortable with and I’ll send u some pics of it

How do I remove just the hydraulic head? Does the quill shaft have to be removed? Or does the timing need to be in a certain position for it to come out. I have every thing off with the timing points lined up but the head won't come out. I remember there was a certain position it had to be in...

Ok so I should have no problems interchanging the 90100a with the 90101a? Sorry just trying to double check if anyone has done this because the TM is not very clear

So if I was running a 90100a and I think it may have a hair line crack so I was going to replace it and was having trouble finding a 90100a but I did find a used 90101a looks just about as old as the on one I had. So it is not a new head will I run into any problems running this one on do I need...

What is the difference between the 90100a and the 90101a hh on the m35a2?

Do you have a link to that post? I'd like to see how to rebuild the torque link. Mine is shot. Thanks

Yes you can pop those rings off and then tap them in nice and flat with a mallet. or toss them not needed