• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by Longlock10

  1. L

    1995 m1078 not getting any power after unhooking batteries and welding on frame?

    Is there a circuit breaker anywhere on the truck, i have not been able to find one
  2. L

    1995 m1078 not getting any power after unhooking batteries and welding on frame?

    Things are wired correctly, but still not getting anything as far as the 12 volts up to he polarity box and only getting 13 volts on the 24 volt side?
  3. L

    1995 m1078 not getting any power after unhooking batteries and welding on frame?

    It was already configured with the two napa batteries and i hooked the up the same way as they were, but thats not to say that they are not wrong. I am by no means electrically inclined and if anyone could help out with how the two batteries should be wire and how the polarity box should be...
  4. L

    1995 m1078 not getting any power after unhooking batteries and welding on frame?

    ground clamp was attached to the back by the pintle hitch
  5. L

    1995 m1078 not getting any power after unhooking batteries and welding on frame?

    I have replaced all fuses and relays along with the batteries (2 napa commercial 7236), and i have also cleaned all of the grounds. i have around 13 volts at each battery and around 13 volts on the 24v side of the reverse polarity box and nothing at the 12v side in the fuse panel? Since i hooked...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks