Recent content by lukasmcdukas

8" suspension lift, custom crossover/heim steering setup, and some 37's... new front shaft to accomodate the lift. working on rebuilding the trailering setup... someone pulled off all the wiring, connectors, and pintle hitch before I bought it :x

I recently picked up a 3" body lift for my 86 M1028 so I can stuff some good ol' nankang M870's underneath (instead of the 35 BFGs she's on now)... then it's off to Gear Vendors for an auxiliary transmission to turn that 3spd TH400 into a 6spd auto w/OD. should be able to easily hit 80mph...

well then, it looks like I'm rebuilding my hubs, too. thanks guys!

just pulled the front shaft. it was definitely the cause... the front shaft spins, even with the truck in 2H... maybe my hubs are sticking, but they're both in the "Free" position. verified several times during troubleshooting my issue. even did a "ghost ride the whip" to check if the shaft was...

ackevor: I have a similar vibration in my M1028 (which BTW, saddamsnightmare, has no issues getting to 65mph... won't do much more than that until I slap a gear vendors under there, but she gets there just fine). below 15mph its nonexistent. most violent at 25mph, increases in frequency with...