Recent content by M1008it

Tnks Barman, It's very difficult to find this mt27's nose cone (here in europe..)so I put in standby the replacement for buying a new mt28 . Refurbishment prj Will be my task in the future. Now my goal Is to start this engine

Hi folks, I'm watching to replace this mt27 with mt28 as you Say to me but i Need your help. For buying the correct starter motor i Need to know the starter nose"s flange diameter. At this point I'm assumimg my starter nose was changed and I not take in consideration It measure. I found an...

Here I'm folks, Sorry for the delay, busy days Here with Kids family and so on. I took some photos of starter : I took some photos of flywheel After this I took out the solenoid and put up the starter motor (my intention was be able to move the bendix out to the flywheel) strenght bolts...

Hi folks, tnks for the help. Yes sunday I've already start to open the starter. Tonight I will post some photos of the components ( bendix, armature etcetc) and some photos of flywheel too . @cucvmule here some answers : Did the original starter work on your truck before problems? Or you...

Update : changed starter's Bolt but still grinding. Checked flywheel's Bolt torque but still grinding. Put 2mm shim on outside starter's Bolt but still grinding. I put the starter down, open It and checked the pinion.( The rebuit shop changed It but ,now, I'm not sure of their work) Any of...

[ I added LED's from NAPA for the gauge lighting and voltmeters. I thought it turned out pretty well] Super cool !! They look so nice. What kind of leds are this? M1008it

Thnks sbgarage, I followed your suggestion, It was very difficult and expensive to find new starter bolts but if that is what is needed to make the pickup work then I will do it. let's see.. M1008it

Hi guys, I Need you point of view about my starter. I've got a Mt27 and few months ago I send to rebuilt at the shop. Yesterday I've finished to rebuilt the motor and I put up the starter, I turned the Key and.. grinding with a lot of noise . I made a short video for you. The starter Is "no...

Very nice job mate!!

Thanks fellas, Find 1/4 " threaded Rod here It Is quite difficult. I'm thinking about welding on top of the Bolt a stud. What about the shims? Do any of you have same issues of mine?

Hello fellas, I've One big doubt about my starter. Recently I've refurbished It and Yesterday was the day of loading It on engine. I' ve also read a lot in this forum and well understand the necessity of the bracket. But my starter do not have the predisponition, (attached you findsome...

User Name / Town / Country Migginsbros / Berlin / Germany Holgi / Giessen / Germany suziq / Charleroi / Belgique dmetalmiki / London/ England german M1008 / Frankfurt / Germany Sili / Darmstadt / Germany AirLenFroAH64 / Berlin / Germany Guyfang / Burkunstadt / Germany Robo McDuff / Nove...

Thanks folks. Today I' ve learned another thing about this vehicle and buying stuff on internet . Let's see if these shop people are kind enough to do the return. I understood then that the water pump could work only that it would be inefficient, but it would work i understand , correct? As...

actually the flow of water is different. What do you suggest to do?

Hi folks, Today I' ve tried to replace my old water pump with a brand new One. But.. the new One do nof fit on water pump plate. I've got an M1008 6.2 from 1985 and I bougth a brand new water pump from eastern surplus & equipment few months ago. Has anything like this ever happened to any...