• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M37keppy's latest activity

  • M37keppy
    M37keppy replied to the thread Another problem with M135??.
    I’m just suggesting it as a test to find out if the governor is an issue. I have found if the governor system isn’t working right it...
  • M37keppy
    M37keppy replied to the thread Another problem with M135??.
    It will not effect spark advance operation. When testing leave the fittings open so there’s nothing to act on the governor diaphragm...
  • M37keppy
    M37keppy replied to the thread Another problem with M135??.
    The spark advance is mechanical. The 2 lines feed a centrifugal valve in the base of the distributor for the governor operation.
    • image.jpg
  • M37keppy
    M37keppy replied to the thread Another problem with M135??.
    You can unhook the steel governor lines at the carb to take the governor out of operation for testing. The governor overrides manual...
  • M37keppy
    There is no bushing installed and does not appear to ever be one.
  • M37keppy
    Just finished disassembling the transmission down to the components and everything looks good outside of metal shavings throughout. I...
  • M37keppy
    I don’t have much to share on it yet but got it mounted to the engine stand to work on. I’ve been busy with farm work since the weather...
    • IMG_0868.jpeg
  • M37keppy
    M37keppy replied to the thread International I4 Tractor.
    Mostly nope on the dipstick, two turn valves. The Farmall M’s were the same way. There was an aftermarket dipstick sold by other...
  • M37keppy
    M37keppy replied to the thread International I4 Tractor.
    The I4 and w4 would the same as the farmall H. Most parts, engine, transmission, and some other are interchangeable. Do not scrap those...
  • M37keppy
    All the bolts are still in the flywheel. The spacer was on the shaft with the nut and lock plate with folded tabs still in place. My...
  • M37keppy
    A few weeks ago we were working a m211 hulling a heavy load and after stopping for a stop sign then going through the intersection, it...
    • IMG_0864.jpeg
    • IMG_0863.jpeg
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks