Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Alrighty...Our friend Plasa sent me his prototype, timely and excellent. Tires were at 55ish from last function of old controller. I used HWY to take them to 65ish. After the device was satisfied with the result, I selected Offroad and they deflated to 35-40ish and the controller seemed...
I had a dead master sw and found the K2 dead...temp substituted the same relay from BO Drive slot. I have not been able to figure out spec for spares based on crossing the two sets of vendor numbers on the panel cover. I am not much electrician, but willing to be placed in remedial learning, I...
Yo Gunny...the truck is gorgeous in orange...mine is still sandbox. This is very much what I was thinking, except pins through rectangular tube sides instead of bolts to make it easier to move aft. I see you also have the winch baseplate forward to reduce the bolt stress under load. I hoped to...
GA requires a commercial 26K tag,but fees aren't too bad.
Question on winch power...I got a Sherpa 25k winch wired for 24v, still trying to cipher a physical attachment to the front and/or rear shackle lugs ala towbar with power from the NATO coax. I am using the stock 6P battery setup...what...
Back to CTIS...I have a 1079 that arrived with 5 flashing and holding pressure. After changing all tire/wheels to new assemblies, the under inflated new tires inflated to HWY and the system seemed to start working. A while later, I got a 1082 trailer and hooked up the air and electrics to move...
Blew a diaphram the other day at the end of a 150 mile tour...got a new replacement actuator to create a future spare. The manuals I have found refer to full brake disassembly/rework. Is it possible to R&R the actuator can on the ground and have it all work ?
Greetings Gents...
I have a daughter due a son on 03 Nov in Nashville, Sooo, I'll have to meet y'all at another event.
The thing is, I just cancelled my reservation for03-08 Nov on lot 57 on the Savannah River side at Bobby Brown Park...50 amps if you need it.
Hope it helps somebody.
My magic...
This is actually the first time I have made a list...it looks like a lot and I forgot the through bulkhead A/C and heat combo I put in the milspec location., but it has been almost a year of work. I don't do social media, so this is a step out for me.
Not sure what happened with the last few lines above...
Thanks Gunny and all of you. I picked the 1079 to build on...adapt, improvise, overcome...because the box and its systems were all new unused and the truck showed 2600 miles with clean fluids. There are bigger and more easily adapted...
Thank you gents. I just ran across the GA Rally string and booked a site at Bobby Brown Park in November. I have a grandson due about that time, so the site could become available on short notice and paid, if that becomes a thing, but I look forward to getting to know the folks in this community.