Recent content by makeshiftrod

I know it is not the engine because it is always right on the full line and does not smell of gas or have that gas/ oil mix feel to it. So I am assuming it is the tranny oil. So my next question is, as long as I keep the trans full of the proper oil and do not let it get too low I should be able...

Thanks for all the info everyone. I will post pics in the next day or so. thanks again!!!

why would the trans oil be red? i know atf and dextron would be red but i thought oil was also used in the trans( not sure off the top of my head but something along the lines of sae 30 or 90)?

Hello all, i have an m211 and i have been having this issue for a bit and can't seem to figure it out. at the bottom of the bell housing i have a plug hole, no plug just the hole and was wondering what that is for? second after the truck has run for a bit (10 min maybe) oil drains out that hole...

hi everyone, i am in the process of restoring a bantam t-3 and i am missing the draw bar assembly and the lunette. does anyone have any idea of where or who i may be able to find these parts ? thanks all

thanks Thanks for the help and info. Much appreciated

Would anyone happen to know if you are able to get a master cylinder compatible with the m211 from napa or somewhere else along those lines?

thanks for everyones help. it turned out to be the fuel filter. she runs great now. thanks agin

Hi everyone, hoping you all might be able to help. so my m211 idels great and can do it all day long, but when i put it in drive and tell her to go i get about 300 ft and she feels like she is starving for fuel. but she will start right back up and idle great after it happens. would that be a...

It is a shame to cut her up, but I am in need of parts. I just got my old girl up and running after a year and a half of work. So if you do ( sadly) want to part her out, i will give you a list and you can tell what you can do. Thanks

hi everyone my fuel pump just died on my m211 anyone know where i may be able to get another one? or any ideas on how to bypass the current one nut still making it look original? thanks

thanks alot all

would anyone happen to know where i would be able to obtain vinyl tops for my m211. thanks.

thanks for the help

hi everyone, thanks for your all help on finding the rear brake lines, but now i need the lines for the center axle that go from the body down to the axle. they are flew lines with wierd fittings. would anyone have any ideas on where i could get replacements? i tried napa and why said they...