Recent content by mighty midjet

I used the drill to turn it over. I put a some oil in the cylinder through the injector hole then spun in it off and on for about 5 minutes. I didn't want to do it any longer than that, my drill was getting hot. Nothing came out of the injector. So is it safe to say that my pump is not creating...

Best manual I've seen yet. The only difference from mine and the book is the length of the fuel line feeding the pump.

That's a great idea! Hopefully the drill I have is fast enough. I know it has the torque. There was rust in the valve but none of the components where rusty.

There is no starter on it. :-(

Ok so I pulled the injector and bolted it to the hard line. No fuel is coming out of it. I doesn't matter how much I pull on the starter. I reinstalled the injector after pulling it apart and cleaning it. Leaving the hard line unhooked and letting it putter on ether I can see little puffs of...

Thank you!! I will Probably call you on Monday I do have a check valve. I pulled it off the pump, disassembled it, cleaned a little rust out of it, and reinstalled it. The return line has nothing coming from it. no fuel or air. I pulled the line at the injector but I did not pull the injector.

Hi :beer:. I've been strolling this site for a while and have found it quite useful, especially for getting my Hatz up and going. I have a new toy now that I need some help on. I just got a Yanmar diesel powered generator that won't run. the fuel tank wasn't attached when I got it and...