• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by mopardude

  1. M

    MEP002A - voltage/hertz issue

    Ok i will try that tomorrow and let u know thanks
  2. M

    MEP002A - voltage/hertz issue

    Ok that's good to know cos none of my gauges work, guess i have a few different problems with this machine. Thanks.
  3. M

    MEP002A - voltage/hertz issue

    Yes all the safeties are in place, i lost AC output when i had a light plug in ,then i checked AC volts with a meter on both lugs and outlet, it will drop out just randomly. thanks
  4. M

    MEP002A - voltage/hertz issue

    I have not noticed anything when the power drops out the gauges don't work at the moment waiting for my frequency transducer to come in. i will run the generator tomorrow and pay attention to what it dose when it drops out, what could cause it not to make power on start up ? thanks.
  5. M

    MEP002A - voltage/hertz issue

    It has done both, not sure what to check ? thanks .
  6. M

    MEP002A - voltage/hertz issue

    I ordered a new transducer from the suggested website. Thanks. What would cause intermittent power from the generator? I have to turn it off and restart to get it to produce any power...
  7. M

    MEP002A - voltage/hertz issue

    What I've done so far: cleaned all the fuel system. Governor seems to be working ok. It is kind of hard to start from cold. I'll take pictures tomorrow and upload as well.
  8. M

    MEP002A - voltage/hertz issue

    Thanks. Tested Hz w/ multimeter at socket at full RPM. I can't get it above 51 Hz. Also tested wires at the gauges and the readings are all over the place. I'll need to find a new frequency transducer.
  9. M

    MEP002A - voltage/hertz issue

    Thanks, I'll take pictures tomorrow and post.
  10. M

    MEP002A - voltage/hertz issue

    I haven't downloaded any manuals as I haven't found any yet. but when I increase the RPMs the Hz drop.
  11. M

    MEP002A - voltage/hertz issue

    Hello, Recently purchased 2 MEP002A generators to restore. Been sitting a few years. Finally got one running, however, I can only get 110V out of it and the voltage is irregular. I can't get the hertz to go over 50. Looking for any advice on how to solve issue.
See more
108,635members
163,880threads
2,305,623posts
941online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks