• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by Myrddin

  1. M

    Turn signal switch wire number question (AorB)

    I may have figured it out. It’s the same wire. B seems to be located at the light, where A is at the switch. Can anyone tell me what A and B stand for. And if this a normal way to identify the source vs destination?
  2. M

    Turn signal switch wire number question (AorB)

    He folks. I’m running the signal indicators on my Spedomiter gauge to the wires on the turn signal switch. I remove the cannon plug on the switch that has the lever (not the flasher box). I see the diagram calls for wires 460B and 461B. I can only identify pins A, and B which are 460A and 461A...
  3. M

    4 man Soft Top Kit Question

    NM... MME contacted me and stated that I didn't get the screws or the bow feet... this answers my question. Man, this is aggravating... Figures.
  4. M

    4 man Soft Top Kit Question

    I just tried to install a new Soft Top kit (2 handrails and 2 bows). I didn't get any hardware, and I think there may be some missing retainer for the bows? Can you folks let me know if I should have gotten the retainer for the bows. Or do I just screw the bow directly to the handrail? In the...
  5. M

    Vacuum off intake question

    I see this too. It looks like another cut line.
  6. M

    Vacuum off intake question

    I don’t know why I haven’t done that 😁 here are a few pics. It’s all I see.
  7. M

    Vacuum off intake question

    Is that the line that ran to the fording valve? It’s no longer there. But I think some bits and pieces are. It looks like the air cleaner to selector valve line.
  8. M

    Vacuum off intake question

    Hey guys. QQ… on my M1123 6.5 NA. There are two vacuum lines off the filter housing/air intake. One right off the filter (rubber line to the filter quality gauge), and one more that feels like a hard plastic line (mine is cut). I need help identifying what it’s for, and the routing so I can fix...
  9. M

    Sun Visor

    I just ordered a new set. I think once they are worn, I will have them recovered however I think will work out. I am also looking for some white molle or something to help blend the color... but its whatever at this point. Also, when I do have them recovered... I plan to get the ends reinforced...
  10. M

    Sun Visor

    Hey folks... just wondering if anyone is aware of who might make sun visors. My Humvee is set up for the factory H1 style visor, but the selection is limited to Black, or Tan, unsure if brown was one? I have white seats, so I thought white visors would be right? If I don't have a choice, I can...
  11. M

    HMMWV Reverse lights

    Thank you and everyone else for your help. Hopefully I can return the same sometime. Or help someone else in turn. I’ll follow up once I have wrapped it up.
  12. M

    HMMWV Reverse lights

    I bet that’s why they switched it. The horn on there now is super loud.
  13. M

    HMMWV Reverse lights

    I couldn’t stand it. So I drove home to look for a few min. I see the horn, however the past owner has installed a new horn, it’s mounted just forward the location of the original (that’s still mounted in its factory spot). To install the new horn, they cut the ends off. And used the typical...
  14. M

    HMMWV Reverse lights

    Yeah I have them. I’m just not around the garage. Just trying to get as much info as I can. I’ll see what I can find once I have my hands on it. I’ll be able to look tomorrow I think. Sounds like I may find it under the dash? I’m just unsure where to start. You know how it is when you have half...
  15. M

    HMMWV Reverse lights

    Is it the same wire that goes to the horn? Can’t I just start there and work my way back? I wish I could go look. But I guess once I am able I’ll see where the wire is.
Top