• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

NDT's latest activity

  • NDT
    NDT replied to the thread M925A2 reverse issue.
    If the shifter is not placing the valve body control into the full detent position, this could cause anomalies. This “slipping” upon...
  • NDT
    NDT replied to the thread M925A2 reverse issue.
    If the transfer case drives in forward, it would be highly unusual for it to not drive in reverse.
  • NDT
    NDT replied to the thread Switch not working .
    What about the connector at the fuse box? Did you wiggle something loose?
  • NDT
    NDT replied to the thread AM General MTVR Prototype.
    Most prototypes get cut up by the manufacturers. My prototype HMWWV escaped this fate as some South Bend scrap yard didn’t follow...
  • NDT
    NDT replied to the thread AM General MTVR Prototype.
    Nobody bought it cuz it’s too ugly
  • NDT
    NDT replied to the thread Funvee dead 😕.
    You wiggled an intermittent connection such that it’s good for the moment.
  • NDT
    NDT reacted to HoveringHMMWV's post in the thread M38 Frame Off Restoration with Like Like.
    This past summer, I told my wife that I would like another project. With a smirk, she immediately handed me a list of household chores...
  • NDT
    NDT replied to the thread M246 Revival.
    Word of advice on these tractor-wreckers, you must follow the load chart to a T, the hoist will pick up far more than the boom/shipper...
  • NDT
    NDT replied to the thread Anyone know what this wiring is?.
    Careful they are likely still hot.
  • NDT
    NDT reacted to Costanz1's post in the thread M1165A1W/B3 GMV Thread with Like Like.
    My buddy Mitch and I purchased two of them. We are in Fort Worth. Kevin Riley, Bobby Schaffer and Omar are great contacts if you need...
  • NDT
    NDT replied to the thread M998 Bumper paint suggestions.
    Ask your local Sherwin Williams for some KemLustral wrought iron flat black stock no. F65B50, it's Alkyd enamel and has the perfect CARC...
  • NDT
    NDT replied to the thread M1165A1W/B3 GMV Thread.
    Very pleased to see someone building these special trucks back to GMVs and not declaring them to be "parts trucks" or candidates for EV...
  • NDT
    NDT replied to the thread M35 repaint.
    Random thoughts: A hot water pressure washer will help remove poorly applied paint. Are you going back to a Viet Nam impression? If...
  • NDT
    NDT reacted to Gamble's post in the thread Reminder: Tire Date Codes and visual inspections with Like Like.
    Hello All, Just a reminder to make sure you all replace your tires with old date codes or tires near expiration of the date codes...
  • NDT
    NDT replied to the thread Looking for replica LVOSS rocket tube and/or mounts.
    All over ebay
Show older items
112,717members
166,274threads
2,341,889posts
1,198online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks