-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
NDT's latest activity
-
The troop seats are the same on the 2-1/2 ton and 5 ton drop sides trucks. The only difference (mentioned by G744) between the two... -
Let's try this again.............. There are three wire making connections to the 60 amp units plus a ground (4). Ground - strap to a...
-
NDT replied to the thread Troop seats.So, ejucate me, are the 5 ton dropside troop seats the same as deuce?
-
NDT replied to the thread Troop seats.Looks like deuce: M35, M35A2, M211 to me.
-
NDT replied to the thread PE-95 generator.What suffix letter do you have on the PE-95? There are -A to at least -E. They are different internal configurations.
-
Take out, appears ok. $75. Heavy. UPS, Fastenal, motor freight.
-
-
NDT replied to the thread Worlds hardest starting Mule.Sounds like the only thing you haven't eliminated as a cause is the plug wires. Suggest you grab some solid core ignition wire and...
-
NDT replied to the thread M998 Power Steering Fluid Reservoir Types.Yours with the attached reservoir is the GM Saginaw type. The pancake reservoir feeds this pump through a hose. There are two versions...
-
-
NDT replied to the thread '44 GMC CCKW Restoration.The story goes like this. The 1941,42, and 43 trucks that went to war got consumed and never returned. The 1944 and 45 trucks were...
-
NDT reacted to Black Ops's post in the thread Looking at adding a Clarktor 6 to my collection with
Like.
I believe the model is CT40 and probably made between 1950 and 1958. The yahoo group is now on facebook and has lots of great info... -
NDT replied to the thread Looking at adding a Clarktor 6 to my collection.Parts should be no problem, the engine is the Chrysler 230 right out of a zillion vehicles. That one is called the Clark model Mill 44...
-
NDT replied to the thread '44 GMC CCKW Restoration.It appears the data plate might be correct for that chassis. The "352" part of the number is GM code for short wheelbase, only about...
-
NDT replied to the thread LTT-HC Axle ID tag rivets..Try tapping on the outer edge of the rivet with a really sharp chisel in a ccw direction.
-
NDT replied to the thread '44 GMC CCKW Restoration.The cab is from a truck that was brought home from Norway. See if you can find the frame serial number. That will tell the true story.
-
NDT replied to the thread '44 GMC CCKW Restoration.Yes, the driveline is bound up, drive in reverse while pressing on the lever.
