Recent content by nico87

Thank you very much Fuzzy! Actually, I had the headlights switched on from the start, the one you described on the top left, because I had to drive it on the street on a very cloudy day. I'll try with headlights off and I think you are definitely correct. So this opens up a question. If the...

Thank you very much Fuzzy! Actually, I had the headlights switched on from the start, the one you described on the top left, because I had to drive it on the street on a very cloudy day. I'll try with headlights off and I think you are definitely correct. So this opens up a question. If the...

We have fixed this issue by rebuilding the complete starter motor, cleaning any cable connection and check all connections properly that where loose. The first time we put back the starter there was a misallignment issue due to the wrongdoing of the rebuilder, after replacing with another...

Hi everyone, We’re working on our demonstration MTVR, installing a COPMA 228 knuckle boom robotic crane, and after some heavy rain, we’ve noticed that the CTIS and Transmission Shift Pad Selector no longer light up on the display / LED indicators. However, they still function correctly in...

Thank you for your response! Appreciated. It is very difficult to find wiring schematics so we hope the original settings of the big positive and negative cables as well the thinner cables was done correctly when we got the MTVR, but it seems the starter was remanufactured as well and...

I have been looking at manuals but I seem to not finding it on the catterpillar service engine manual neither on the trainee MTVR guide. Do someone has a technician repair manual for the MTVR?

Hello, We are having some voltage issues on the voltage gauge that has kept spinning up and down and we have seen some smoke coming from this thick and thinblack cables that were loose and disconnected from their bolts that probably runned loose after driving. These cables are under the ECM...