• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by PFC Lug Nut

  1. P

    HF54 with ram assist

    Photo of setup . Front axle is f106 hybrid with 5 ton knuckles built to my specs by Gearhart Engineering. Uses 2 1/2 ton hubs modified to take the 5 ton spindle and bearings.
  2. P

    HF54 with ram assist

    Thanks again, I Googled it every which way but loose but no luck. My truck is a Mud Truck with a double ended cylinder up front. Hydro assist and I am keeping the tie rod so the set up is tricky.
  3. P

    HF54 with ram assist

    Thanks, I have been searching for exactly this. Paul
  4. P

    HF54 with ram assist

    I followed the blue lines with braid cover to the bulkhead fittings. Then to the ram. So the top most of the three ports is either return or pressure in. I dont see any markings at the ports on my unit. Thanks, Paul
  5. P

    HF54 with ram assist

    Hi, I want to do this. I came across a used RossH54 with cylinder assist valve. Looks like the bottom port on the box assembly is pressure in from the pump and the rear port of three on valve [towards box input shaft] is the return port. Is this correct? Thanks, Paul
See more
108,470members
163,733threads
2,303,668posts
870online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks