• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Ray70's latest activity

  • R
    Ray70 replied to the thread MEP-006A.
    Can you further explain where and how you are measuring voltage? Are you seeing voltage at the courtesy outlet? And you get nothing on...
  • R
    Ray70 replied to the thread Are 6TL Batteries worth it?.
    My first and only experience with LiFePO4 was pure disappointment, possibly due to my lack of knowledge about them. I've got a john...
  • R
    Ray70 replied to the thread Mep 802a.
    Do the tests and determine if the issue is the gage, or most likely its the sending unit in the tank. If it's the sending unit, there...
  • R
    Ray70 replied to the thread Heat Pump Soft Start.
    What size is your heat pump and what did you use for a soft starter?
  • R
    Ray70 reacted to Dog Breath's post in the thread Mep-003a fuel injector gaskets with Like Like.
    I found a source for the gaskets 147-0043 for $3.50 a piece if anyone is interested.
  • R
    Ray70 replied to the thread MEP 803A Surging, Not holding frequency.
    It's essentially adjusting the leverage of the spring that counteracts the force of the spinning weights in the governor. If you make...
  • R
    Ray70 replied to the thread M103a3 powerplant switchbox.
    I can confirm it will work. I'm using that style synchronizing switch to switch between an 002 and 003, depending on anticipated load...
  • R
    Ray70 replied to the thread MEP-005A Question.
    I would just have a new line made up. Like I said, 5/16 ( -5AN ) JIC female swivel ends, whatever length is necessary. NAPA or one of...
  • R
    Ray70 replied to the thread MEP-002A No Power To Control Panel.
    Maybe I should rephrase, I was wondering if you tried putting a water separator into the original ( left most ) water separator canister...
  • R
    Ray70 replied to the thread MEP-002A No Power To Control Panel.
    I was wondering if the FRAM CS8941 separators showed up yet and how they look / fit? For $.40 it might be the ultimate score!
  • R
    Ray70 reacted to DieselAddict's post in the thread Mep 802a with Like Like.
    That is NOT the correct part number for S14. As noted before, its not a relay even though it fits the same base. Order the correct part...
  • R
    Ray70 reacted to flydude92's post in the thread MEP-005A Question with Like Like.
    I have one that's 30" end to end. It came off an 005 parts machine and looks like the one that came off the IP. It also looks like...
  • R
    Ray70 reacted to Guyfang's post in the thread MEP-005A Question with Like Like.
    People, Here is a Tip. Item 15 is the hose he needs. Look at the SMR Code. MFOZZ. That tells you that the part is NOT stocked. You have...
  • R
    Ray70 replied to the thread MEP-005A Question.
    You're going to have a hard time finding a replacement. But you can easily have a new on made up. Go to www.discounthydraulichose.com...
  • R
    Ray70 replied to the thread Who has reused a MEP generator engine for other equipement?.
Show older items
112,822members
166,334threads
2,342,540posts
838online users
Top