-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Ray70's latest activity
-
RRay70 replied to the thread MEP 802A What happened here?.Perhaps it was really cold out and someone figured the spiral wound throttle cable sleeve would make a nice resistive heating element to...
-
RRay70 replied to the thread MEP 802A What happened here?.It could depend on where you bought it. Some of the auctions attempt to start them, some don't, some use a slave cable, some don't. I...
-
RRay70 replied to the thread MEP 802A What happened here?.Or possibly hooked up jumper cables in reverse polarity with + on the chassis and - on the + battery post?? Look like some kind of dead...
-
RRay70 replied to the thread 802a power output issues.He's on it... He's got the Deoxit on order so he can clean the switches, he's also working on learning about the droop adjustment and...
-
RRay70 replied to the thread 802a power output issues.The MOV is not seeing anywhere near 120V, if that's what you're thinking.....?
-
RRay70 replied to the thread 802a power output issues.I'd suggest using something other than your inverters to load test it. Use an old electric oven, some heat guns etc. something you can...
-
RRay70 replied to the thread 802a power output issues.
-
RRay70 replied to the thread MEP 802a Will Not Start..Just make up a daisy chain jumper with spade connectors crimped on the ends and jump 2,4,6 and 8 together, then reinstall as normal. 3...
-
RRay70 replied to the thread 802a power output issues.Sounds like you guys got it covered..... I was late to the party! :ROFLMAO:
-
RI'm glad to see that fire threat is down somewhat for you. I guess my take on the generators and fire preparedness is that it is just...
-
RRay70 replied to the thread MEP 802a Will Not Start..Take a multi-meter and check to see if terminals 2,4,6 and 8 are all connected together internally.
-
RShow us a picture of the switch. There are three different kinds. If the jumpers are missing on the Mark 1 and Mark 2 switches, that...
-
RRay70 replied to the thread MEP 802a Will Not Start..Follow the red and green lines.
-
RRay70 replied to the thread MEP 802a Will Not Start..Also, you're measuring S1-7 right at the switch and nothing there when attempting to crank? At first glance of the schematic, I think...
-
RRay70 replied to the thread MEP 802a Will Not Start..Is this a new to you machine ( from auction etc ) or something you've had running and not it won't start? Can you post a picture of the...
