• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Ronmar's latest activity

  • R
    Ronmar replied to the thread CTIS issues.
    Cool, you found it! This has been a fairly common issue I have helped troubleshoot. Probably a mud dauber or some other insect...
  • R
    Ronmar reacted to Bill Pfeiffer's post in the thread CTIS issues with Like Like.
    I would like to thank everyone for their assistance, I disconnected the vent line at the PCU and the system is working normally...
  • R
    Ronmar reacted to Aviator4x4's post in the thread M1078A1 "Pandora" Build | 2024-??? | ***Picture Heavy*** with Like Like.
    Here are some pictures of the fitment of the commercially available seal drivers. It's close... but almost completely ineffective since...
  • R
    Ronmar reacted to Aviator4x4's post in the thread M1078A1 "Pandora" Build | 2024-??? | ***Picture Heavy*** with Haha Haha.
    Started reinstalling hubs and EcoHubs today ! The seal drivers available on Amazon/Napa aren't an exact fit, but the TMs have diagrams...
  • R
    Ronmar reacted to MatthewWBailey's post in the thread M1078A1 fuel starting issue with Like Like.
    Been busy but made progress on this today. Pulled the reg and pumped the primer, no pressure built up, just fuel pouring out of the...
  • R
    Ronmar replied to the thread Transmission-Related Questions.
    It goes out thru the bottom. In one of the manuals there are specs for a lifting jig to do it with a crane(bed removed). i am having...
  • R
    Ronmar reacted to Third From Texas's post in the thread Subframe question with Like Like.
    I can only speak to the OEM M1079 captured spring system on my hab. I live on the coast in S.Tx and it blows 25mph on a normal day...
  • R
    Ronmar replied to the thread Cruise Control?.
    OOPS, I screwed that up. I was thinking it was 36, but found one of my other posts on the subject indicating 26. I think I typed that...
  • R
    Ronmar replied to the thread Cruise Control?.
    I could always put a freq counter on it and drive to be certain of the final output, but on my A0 it does sense a 36 tooth spinning...
  • R
    Ronmar replied to the thread Subframe question.
    Yea the subframe is supposed to allow the box to move when the frame twists. The thing about captured spring is that they WILL impart...
  • R
    Ronmar replied to the thread Cruise Control?.
    Ok with stock wheels and 2:1 hubs(7.8:1 total ratio, at ~60MPH the driveshaft is spinning an insane 3375 RPM. If I recall the output...
  • R
    Ronmar reacted to Kevin Means's post in the thread Cruise Control? with Like Like.
    Wow! That would be great. Thank you. BTW, I really enjoyed your youtube video about manual tire inflation. I've got a used CTIS...
  • R
    Ronmar replied to the thread Subframe question.
    Well not knowing how their box is connected, hard to tell what was actually moving. Moving around on my frame, I have noticed quite a...
  • R
    Ronmar replied to the thread Subframe question.
    Yea that sounds weird. Perhaps they did not have enough/any spring preload... I am also not sure how "noodly" the unimog frame is...
  • R
    Ronmar reacted to AKPacker's post in the thread Gen 2 A/C install questions with Like Like.
    Waterloo Specialties normally sells everything you need, but the evaporators have been few and far between, and condensers have been...
Show older items
112,803members
166,327threads
2,342,464posts
1,060online users
Top