-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Ronmar's latest activity
-
RBack up a minute - what is your issue exactly? The idler and tensioner pulleys don't get replaced - you replace the bearings in them...
-
RRonmar replied to the thread M1078A1 "Pandora" Build | 2024-??? | ***Picture Heavy***.IS yours still intact, or are you needing one because you don't have one? If you have one, you can pull it, remove the covering over...
-
RRonmar replied to the thread Subframe question.Yep, lotta simple ways to fry this fish...:) Planning something similar for stability, 2 angled struts(~60 degree down angle) with...
-
RRonmar replied to the thread Roof Leaks.You could also do the same thing with a bead of spray foam. Spray a bead, let it cure then place the cover which will compress the bead...
-
RRonmar replied to the thread Roof Leaks.I might pay money to watch that:)
-
RRonmar replied to the thread M1083A1 Wire Numbers for Location/.Yea I use a tablet where I can zoom in on the PDF. I use paper sometimes when I am working out a circuit, or redesigning/retasking one...
-
RRonmar replied to the thread M1083A1 Wire Numbers for Location/.And your 4ga clue pointed me right to it. TL508 connects to the solenoid L10 at the back of the head that feeds the intake heater. it...
-
RIt's a custom build, obviously. Hard to tell exactly how much smaller it really is due to the fish-eye effect of the camera, but iirc...
-
RRonmar replied to the thread M1083A1 Wire Numbers for Location/.well 4GA is pretty large, maybe for the intake air heater?
-
RTL number is a 4 gauge andcapable of reaching the alternator. I will go to the schematic again. I do have to say the schematic for the...
-
RRonmar replied to the thread M1083A1 Wire Numbers for Location/.Unfortunately wire numbers can be difficult as there is not a clear listing. far easier with TL or plug numbers, as most of the plugs...
-
RRonmar replied to the thread Roof Leaks.Yea I am putting a fairing/box up there, so it would be like a sunroof in the basement:)
-
RThat's not stock - someone tried. Stock it is just foam tape and sikaflex around the perimeter so it's easy to peel it off for a weapons...
-
RRonmar replied to the thread Roof Leaks.I seem to recall seeing at least 2 different versions of "moon roof" hatch covers... This one is operable, the first one I recall was...
-
RRonmar replied to the thread Roof Leaks.Mine had a strip of tape sealant applied around the circle. Except the bright light that put that strip in, left a gap between the two...
