• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Ronmar's latest activity

  • R
    Ronmar reacted to hike's post in the thread 2003 M1083A1 Does C7 replace 3126? with Like Like.
    I have been wondering how a 7JZ to another 7JZ could be a 3126 to a C7. Putting his serial numbers 7JZ00594 and 7JZ06815 in CAT SIS...
  • R
    Ronmar replied to the thread Just won an auction - M1088A1.
    I have always used a large screwdriver with a notch in the end of the blade… the first time I ever used a set of spring pliers was a...
  • R
    Ronmar reacted to ckouba's post in the thread Subframe question with Like Like.
    I know I'm late to the party and I'm not going to waste my time watching the vid, but I am pretty certain their issue is all suspension...
  • R
    Ronmar reacted to GeneralDisorder's post in the thread Yet another alternator question with Like Like.
    Back up a minute - what is your issue exactly? The idler and tensioner pulleys don't get replaced - you replace the bearings in them...
  • R
    Ronmar replied to the thread M1078A1 "Pandora" Build | 2024-??? | ***Picture Heavy***.
    IS yours still intact, or are you needing one because you don't have one? If you have one, you can pull it, remove the covering over...
  • R
    Ronmar replied to the thread Subframe question.
    Yep, lotta simple ways to fry this fish...:) Planning something similar for stability, 2 angled struts(~60 degree down angle) with...
  • R
    Ronmar replied to the thread Roof Leaks.
    You could also do the same thing with a bead of spray foam. Spray a bead, let it cure then place the cover which will compress the bead...
  • R
    Ronmar replied to the thread Roof Leaks.
    I might pay money to watch that:)
  • R
    Ronmar replied to the thread M1083A1 Wire Numbers for Location/.
    Yea I use a tablet where I can zoom in on the PDF. I use paper sometimes when I am working out a circuit, or redesigning/retasking one...
  • R
    Ronmar replied to the thread M1083A1 Wire Numbers for Location/.
    And your 4ga clue pointed me right to it. TL508 connects to the solenoid L10 at the back of the head that feeds the intake heater. it...
  • R
    Ronmar reacted to Third From Texas's post in the thread Roof Leaks with Like Like.
    It's a custom build, obviously. Hard to tell exactly how much smaller it really is due to the fish-eye effect of the camera, but iirc...
  • R
    Ronmar replied to the thread M1083A1 Wire Numbers for Location/.
    well 4GA is pretty large, maybe for the intake air heater?
  • R
    Ronmar reacted to Lugnuts's post in the thread M1083A1 Wire Numbers for Location/ with Like Like.
    TL number is a 4 gauge andcapable of reaching the alternator. I will go to the schematic again. I do have to say the schematic for the...
  • R
    Ronmar replied to the thread M1083A1 Wire Numbers for Location/.
    Unfortunately wire numbers can be difficult as there is not a clear listing. far easier with TL or plug numbers, as most of the plugs...
  • R
    Ronmar replied to the thread Roof Leaks.
    Yea I am putting a fairing/box up there, so it would be like a sunroof in the basement:)
Show older items
112,796members
166,317threads
2,342,380posts
781online users
Top