-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Ronmar's latest activity
-
RRonmar replied to the thread No air in the wet tank.The first pic looks like the front brake quick release valve. The second pic is the check valve that feeds back to the wet tank to...
-
RRonmar replied to the thread No air in the wet tank.Where is the noise coming from? There is a pressure safety relief on top, those sometimes leak, but air would have to be leaking back...
-
RRonmar reacted to fuzzytoaster's post in the thread What is the history of A/C in FMTV vehicles? with
Like.
Yes, GenII (P2) cabs are NBC sealed (see filter/blower unit behind driver). Gen1 cabs are pressure sealed for blast resistance but I'm... -
RRonmar replied to the thread No air in the wet tank.Yes, thats normal. The service tanks have a check valve on their input from the wet tank. This isolates them from the wet tank and...
-
RRonmar replied to the thread No air in the wet tank.The only checks are at the outlet of the dryer and the inlets to the service tanks… you can see them in the photo you shared, or in the...
-
RRonmar replied to the thread No air in the wet tank.Me either, especially ctis as it uses wet tank air out the back side of the tank thru the protection valve(looks like a regulator)…...
-
RRonmar replied to the thread No air in the wet tank.Remove the T fitting on the back end of the fank and confirm the port that feeds the wet tank is not plugged. air flows from the...
-
RRonmar replied to the thread No air in the wet tank.Here are before and afters of my wet tank plumbing… swap 2 fittings and hoses and 100% of the air now goes thru the wet tank like it is...
-
-
RRonmar replied to the thread No air in the wet tank.I would say your drain valve is plugged/deffective as what you describe simply is not possible. Set it to the open position and probe...
-
-
RAlcohol is.
-
RRonmar reacted to GeneralDisorder's post in the thread What is the history of A/C in FMTV vehicles? with Like.
It is pressurized. Not particularly to withstand any specific attack though it would probably help in terms of NBC. The real concern is...
-
RYou will find MANY unused connectors on every vehicle made in the post-WWII era. The wiring harnesses are built in a modular fashion and...
-
RRonmar replied to the thread Transfer Case Lock Health Check.Well C7 pressure still isn't a "health check" it just means it is trying to send pressure... You could also look at the diff-lock...
-
RRonmar replied to the thread Just won an auction - M1088A1.there are a couple unused plugs under the pax dash. The trucks use a generic wire harness that supports different options that may or...
-
RIt's a 2003 M1088 A1. I've downloaded all the TMs for the 1083s would it be in there somewhere? OK, I just found the FMTVA1 schematic.
